Are you using hotplug?

On Sun, 23 Jun 2002, David wrote:

> On Sun, 23 Jun 2002, Stephen J. Gowdy wrote:
> 
> > Here is the relevant piece of the FAQ;
> >
> > Q: How do I report a bug?
> >
> > A:First make sure that it's a bug that hasn't yet been fixed. Try using a
> > recent stable kernel, the most current one if possible, to see if the bug
> > is still "alive". If it's fixed already, keep using that kernel!
> > Otherwise, once you've verified that the bug is still munching away, post
> > a good description of it to the right Linux-USB mailing list.
> 
> kernel : 2.4.19-pre10
> 
> >
> > In addition to the information required in /usr/src/linux/REPORTING-BUGS,
> > it also helps enormously if you provide the output of
> > /proc/bus/usb/devices. If you are having problems with your host
> > controller being recognised, it helps to have the output of lspci -v. If
> > it is supposed to be UHCI, it helps to know whether interrupts are being
> > generated every second. You should send this information to the user/help
> > mailing list.
> 
> root@erwin:/usr/src/linux# ./scripts/ver_linux
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
> 
> Linux erwin 2.4.19-pre10 #1 Thu Jun 20 23:32:37 CDT 2002 i686 unknown
> 
> Gnu C                  2.95.3
> Gnu make               3.79.1
> binutils               2.11.90.0.19
> util-linux             2.11f
> mount                  2.11b
> modutils               2.4.6
> e2fsprogs              1.22
> reiserfsprogs          3.x.0j
> pcmcia-cs              3.1.26
> PPP                    2.4.1
> Linux C Library        2.2.3
> Dynamic linker (ldd)   2.2.3
> Procps                 2.0.7
> Net-tools              1.60
> Kbd                    1.06
> Sh-utils               2.0
> Modules Loaded         sd_mod quickcamex ide-scsi tulip usb-storage
> scsi_mod usbserial parport_pc parport
> 
> This reported one wrong.  my GNU C version is 3.0.4
> 
> processor : Athlon 800MHZ
> 
> root@erwin:/proc/scsi# cat scsi
> Attached devices:
> Host: scsi1 Channel: 00 Id: 00 Lun: 00
>   Vendor: Sandisk  Model: ImageMate SDDR09 Rev: 0208
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> 
> 
> 
> /proc/bus/usb/devices does not exist, though /proc/bus/usb does
> 
> 
> all my other USB devices work fine (webcam and Sony Clie PDA)
> 
> >
> > If you are using UHCI, try to reproduce the problem with the "other" UHCI
> > host controller driver (HCD). There are currently two UHCI drivers, which
> > don't always behave the same: usb-uhci and uhci (the "alt" or "JE"
> > driver). If you find that you have a workaround, please still report the
> > problem! And make sure you say which HCD(s) you're using.
> >
> 
> OHCI controller
> 
> > If you have access to both OHCI and UHCI host controllers, please try to
> > reproduce your problem with both kinds of controller. Since these use
> > different HCDs, they may behave differently in some situations. The reason
> > might be a device drivers assuming some HCD-specific behavior, or an HCD
> > not doing the right thing.
> >
> >
> > On Sun, 23 Jun 2002, David wrote:
> >
> > > On Sat, 22 Jun 2002, Stephen J. Gowdy wrote:
> > >
> > > > You'll need to supply more information. Complete kernel logs and various
> > > > outputs of commands, you'll find the requeste information list in the FAQ
> > > > at http://www.linux-usb.org/.
> > > >
> > >
> > > What more information do you want?  I went to the FAQ's at
> > > http://www.linux-usb.org/, and I didn't see any other place that contains
> > > needed information that i haven't already supplied.  I gave my kernel log
> > > in my initial message(/var/log/syslog).  Any help would be appreciated.
> > > Thanks
> > >
> > >
> >
> >
> 
> 

-- 
 /------------------------------------+-------------------------\
|Stephen J. Gowdy                     | SLAC, MailStop 34,       |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road,     |
|http://calendar.yahoo.com/gowdy      | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED]       | Tel: +1 650 926 3144     |
 \------------------------------------+-------------------------/



-------------------------------------------------------
Sponsored by:
ThinkGeek at http://www.ThinkGeek.com/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to