On Fri, Sep 06, 2002 at 01:32:13PM -0500, Ken Causey wrote:
> Well I ended up ordering a Keyspan USA19QW. I downloaded the drivers
> from the keyspan website and built them with 2.4.19. I can load the
> module and attach the device and start minicom on /dev/ttyUSB0 and there
> are a plethora of kernel messages starting with keyspan.c: that all look
> OK (no obvious errors) but I just can't get any response over the serial
> connection in minicom. Any help anyone can provide is appreciated. If
> someone could recommend an appropriate IRC channel or maybe another list
> I would make use of it. If someone would like more information like for
> example the kernel message, also let me know.
I don't really trust the drivers from the keyspan site. If you want to,
I would recommend getting 2.4.19, and applying the 2.4.20-pre5 patch,
and these two patches:
http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-usbserial-2.4.20-pre5.patch
http://www.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-keyspan-2.4.20-pre5.patch
that should give you a working driver for your device. If not, please
let us know (along with the kernel message that you think is odd.)
As for IRC channels, #kernelnewbies is a good place to hang out, I'm
usually there during the week.
Hope this helps,
greg k-h
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
