I think that you are correct in getting a flash card reader and I have
managed to find a USB cable for my cell phone but I still don't know how
to address the phone in Linux.
I have tried /dev/ttyUSB0 & 1 and both fail with :-
Failed to open /dev/ttyUSB0: No such device
Where do I start looking to get this working ? From what I can see in
start up messages USB is up and running, so now what do I need to do ?
---
Regards,
Alf Stockton www.stockton.co.za
"Well, if you can't believe what you read in a comic book, what *___can*
you believe?!"
-- Bullwinkle J. Moose [Jay Ward]
On Mon, 11 Nov 2002, Cam wrote:
> Alf
>
> > Which solution would make more sense ?
> >
> > My gut feel tells me to buy the cables.
>
> I'd strongly recommend getting a USB flash card reader, as serial comms
> can be very slow to transfer image files. I haven't looked back since I
> got a cheap 6-in-1 card reader. Also, you can take the card reader with
> you and use it on another PC or storage device - so it's more useful
> than just a cable.
>
> You will still need a serial cable for the cellphone - I don't know if
> there is anything special about cables that are available for a
> particular device, or if you can use a generic USB->serial convertor.
>
> -Cam
>
> --
> [EMAIL PROTECTED] <--
>
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
