Perhaps some could help with a modules.conf question?
I upgraded to an Asus A7N8X with two USB controllers and one USB2.
At the moment, I have only a APC backup plugged in.
The previous system--nonUSB2--had no problem. It detected and found the APC.
my 'modules.conf' (today) has
alias usb usb-ohci
alias usb-controller usb-ohci
alias usb-controller1 usb-ohci
alias usb-controller2 ehci-hcd
When the system boots, lsmod only shows...
Module Size Used by Not tainted
ncr53c8xx 51840 2 (autoclean)
st 26164 2 (autoclean)
mousedev 3872 0 (unused)
hid 13088 0 (unused)
input 3072 0 [mousedev hid]
usbcore 54016 1 [hid]
dmesg seems to be OK but I dont if I'm reading this well...
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:15:44 Jan 12 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
but the boot log shows:
Jan 14 15:24:52 tucksLinux kernel: usb.c: registered new driver usbdevfs
Jan 14 15:24:52 tucksLinux kernel: usb.c: registered new driver hub
Jan 14 15:24:52 tucksLinux kernel: usb-uhci.c: $Revision: 1.275 $ time 19:15:44
Jan 12 2003
Jan 14 15:24:52 tucksLinux kernel: usb-uhci.c: High bandwidth mode enabled
Jan 14 15:24:52 tucksLinux kernel: usb-uhci.c: v1.275:USB Universal Host
Controller Interface driver
Jan 14 15:24:52 tucksLinux kernel: usb.c: deregistering driver usbdevfs
Jan 14 15:24:52 tucksLinux kernel: usb.c: deregistering driver hub
Jan 14 15:24:52 tucksLinux usbmgr[340]: start 0.4.6
Jan 14 15:24:52 tucksLinux kernel: usb.c: registered new driver usbdevfs
Jan 14 15:24:52 tucksLinux kernel: usb.c: registered new driver hub
Jan 14 15:24:53 tucksLinux kernel: usb.c: registered new driver hid
Jan 14 15:24:53 tucksLinux kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech
Pavlik <[EMAIL PROTECTED]>
Jan 14 15:24:53 tucksLinux kernel: hid-core.c: USB HID support drivers
Jan 14 15:24:53 tucksLinux kernel: mice: PS/2 mouse device common for all mice
Jan 14 15:24:53 tucksLinux usbmgr[342]: "hid" was loaded
Jan 14 15:24:53 tucksLinux usbmgr[342]: "mousedev" was loaded
Jan 14 15:24:53 tucksLinux kernel: usb-uhci.c: $Revision: 1.275 $ time 19:15:44
Jan 12 2003
Jan 14 15:24:53 tucksLinux kernel: usb-uhci.c: High bandwidth mode enabled
Jan 14 15:24:53 tucksLinux kernel: usb-uhci.c: v1.275:USB Universal Host
Controller Interface driver
Jan 14 15:24:53 tucksLinux insmod:
/lib/modules/2.4.20-ac2/kernel/drivers/usb/usb-uhci.o: init_module: No such
device
Jan 14 15:24:53 tucksLinux insmod: Hint: insmod errors can be caused by
incorrect module parameters, including invalid
IO or IRQ parameters
Jan 14 15:24:53 tucksLinux insmod:
/lib/modules/2.4.20-ac2/kernel/drivers/usb/usb-uhci.o: insmod
/lib/modules/2.4.20-ac
2/kernel/drivers/usb/usb-uhci.o failed
Jan 14 15:24:53 tucksLinux insmod:
/lib/modules/2.4.20-ac2/kernel/drivers/usb/usb-uhci.o: insmod usb-uhci failed
Jan 14 15:24:53 tucksLinux usbmgr[342]: "usb-uhci" was loaded
Jan 14 15:24:53 tucksLinux usbmgr[401]: mount /proc/bus/usb
So, I think the modules.conf has errors but I've tried enough combinations (but
not
the right one).
At this point, usbtree shows nil.
If I manually do:
modprobe usb-ohci
modprobe ehci-hcd
and then, usbtree shows:
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-hcd/6p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=usb-ohci/3p, 12M
|__ Port 2: Dev 3, If 0, Class=HID, Driver=hid, 1.5M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=usb-ohci/3p, 12M
and dmesg shows
usb-ohci.c: USB OHCI at membase 0xd08f0000, IRQ 5
usb-ohci.c: usb-00:02.0, PCI device 10de:0067
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Setting latency timer of device 00:02.1 to 64
usb-ohci.c: USB OHCI at membase 0xd08f2000, IRQ 11
usb-ohci.c: usb-00:02.1, PCI device 10de:0067
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
hub.c: new USB device 00:02.1-2, assigned address 2
: USB HID v1.00 Joystick [American Power Conversion Back-UPS 500 FW: 6.1.D USB
FW: c1 ] on usb2:2.0
PCI: Setting latency timer of device 00:02.2 to 64
hcd.c: ehci-hcd @ 00:02.2, PCI device 10de:0068
hcd.c: irq 5, pci mem d08f9000
usb.c: new USB bus registered, assigned bus number 3
ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0
usb.c: USB disconnect on device 00:02.1-2 address 2
hub.c: USB hub found
hub.c: 6 ports detected
hub.c: new USB device 00:02.1-2, assigned address 3
: USB HID v1.00 Joystick [American Power Conversion Back-UPS 500 FW: 6.1.D USB
FW: c1 ] on usb2:3.0
So, can somebody spot something?
One more thing, 2.4.20-ac2
Thanks,
Tuck Hartshorn
-------------------------------------------------------
This SF.NET email is sponsored by: Take your first step towards giving
your online business a competitive advantage. Test-drive a Thawte SSL
certificate - our easy online guide will show you how. Click here to get
started: http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0027en
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
