--- "Stephen J. Gowdy" <[EMAIL PROTECTED]> wrote: > What do you rkernel logs show?
A lot of things. :( I will try to paste the relavant lines. Boot messages: Mar 19 06:28:10 localhost rc.sysinit: Initializing USB controller (usb-uhci): succeeded Mar 19 06:28:10 localhost rc.sysinit: Mounting USB filesystem: succeeded Mar 19 06:28:10 localhost rc.sysinit: Initializing USB HID interface: succeeded Mar 19 06:28:13 localhost /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0 Mar 19 06:28:13 localhost /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0 Mar 19 06:28:13 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 06:28:41 localhost kernel: usb.c: registered new driver usbdevfs Mar 19 06:28:41 localhost kernel: usb.c: registered new driver hub Mar 19 06:28:41 localhost kernel: usb-uhci.c: $Revision: 1.275 $ time 06:17:44 Mar 14 2003 Mar 19 06:28:41 localhost kernel: usb-uhci.c: High bandwidth mode enabled Mar 19 06:28:41 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10 Mar 19 06:28:41 localhost kernel: usb-uhci.c: Detected 2 ports Mar 19 06:28:41 localhost kernel: usb.c: new USB bus registered, assigned bus number 1 Mar 19 06:28:41 localhost kernel: hub.c: USB hub found Mar 19 06:28:41 localhost kernel: hub.c: 2 ports detected Mar 19 06:28:41 localhost kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Mar 19 06:28:41 localhost kernel: usb.c: registered new driver hiddev Mar 19 06:28:41 localhost kernel: usb.c: registered new driver hid Mar 19 06:28:41 localhost kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> Mar 19 06:28:41 localhost kernel: hid-core.c: USB HID support drivers Mar 19 06:28:41 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 Mar 19 06:28:42 localhost kernel: usb.c: USB device 2 (vend/prod 0x402/0x5621) is not claimed by any active driver. Mar 19 06:28:42 localhost kernel: Initializing USB Mass Storage driver... Mar 19 06:28:42 localhost kernel: usb.c: registered new driver usb-storage Mar 19 06:28:42 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices Mar 19 06:28:42 localhost kernel: Vendor: HL-DT-ST Model: CD-RW GCE-8160B Rev: 2.08 Mar 19 06:28:42 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02 Mar 19 06:28:42 localhost kernel: USB Mass Storage support registered. Attempts to do something: Mar 19 06:30:25 localhost kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 Mar 19 06:30:25 localhost kernel: Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0 Mar 19 06:30:25 localhost kernel: (scsi0:A:3): 40.000MB/s transfers (20.000MHz, offset 15, 16bit) Mar 19 06:30:25 localhost kernel: sr0: scsi-1 drive Mar 19 06:30:25 localhost kernel: Uniform CD-ROM driver Revision: 3.12 Mar 19 06:30:25 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 253 Mar 19 06:30:25 localhost kernel: usb.c: USB disconnect on device 2 Mar 19 06:30:25 localhost kernel: sr1: scsi-1 drive Mar 19 06:30:25 localhost kernel: sr1: CDROM not ready. Make sure there is a disc in the drive. Mar 19 06:30:25 localhost kernel: cdrom: open failed. Mar 19 06:30:25 localhost kernel: Device not ready. Make sure there is a disc in the drive. Mar 19 06:30:25 localhost kernel: sr1: CDROM not ready. Make sure there is a disc in the drive. Mar 19 06:30:25 localhost kernel: cdrom: open failed. Mar 19 06:30:25 localhost kernel: Device not ready. Make sure there is a disc in the drive. Mar 19 06:30:25 localhost kernel: sr1: CDROM not ready. Make sure there is a disc in the drive. Mar 19 06:30:25 localhost kernel: cdrom: open failed. Mar 19 06:30:25 localhost kernel: Device not ready. Make sure there is a disc in the drive. Mar 19 06:30:26 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 3 Mar 19 06:30:29 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 06:51:54 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 2025 Mar 19 06:51:54 localhost kernel: usb.c: USB disconnect on device 3 Mar 19 06:51:55 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 4 Mar 19 06:51:58 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 07:29:25 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 530 Mar 19 07:29:25 localhost kernel: usb.c: USB disconnect on device 4 Mar 19 07:29:26 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 5 Mar 19 07:29:29 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 07:30:51 localhost kernel: Uniform CD-ROM driver unloaded Mar 19 07:30:53 localhost kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 Mar 19 07:30:53 localhost kernel: Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0 Mar 19 07:30:53 localhost kernel: sr0: scsi-1 drive Mar 19 07:30:53 localhost kernel: Uniform CD-ROM driver Revision: 3.12 Mar 19 07:30:53 localhost kernel: usb-uhci.c: interrupt, status 2, frame# 464 Mar 19 07:30:53 localhost kernel: usb.c: USB disconnect on device 5 Mar 19 07:30:53 localhost kernel: sr1: scsi-1 drive Mar 19 07:30:54 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 6 Mar 19 07:30:57 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 07:31:13 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1880 Mar 19 07:31:13 localhost kernel: usb.c: USB disconnect on device 6 Mar 19 07:31:14 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 7 Mar 19 07:31:17 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 07:33:04 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 472 Mar 19 07:33:05 localhost kernel: usb.c: USB disconnect on device 7 Mar 19 07:33:05 localhost kernel: Device not ready. Make sure there is a disc in the drive. Mar 19 07:33:05 localhost kernel: Device not ready. Make sure there is a disc in the drive. Mar 19 07:33:05 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 8 Mar 19 07:33:05 localhost kernel: usb.c: USB disconnect on device 8 Mar 19 07:33:06 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 9 Mar 19 07:33:08 localhost /etc/hotplug/usb.agent: ... no modules for USB product 402/5621/103 Mar 19 07:33:09 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 07:34:11 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1888 Mar 19 07:34:11 localhost kernel: usb.c: USB disconnect on device 9 Mar 19 07:34:12 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 10 Mar 19 07:34:15 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 07:35:08 localhost kernel: Uniform CD-ROM driver unloaded Mar 19 07:35:24 localhost kernel: usb.c: deregistering driver usb-storage Mar 19 07:35:24 localhost kernel: scsi : 1 host left. Mar 19 07:35:31 localhost kernel: usb.c: USB disconnect on device 1 Mar 19 07:35:31 localhost kernel: usb.c: USB disconnect on device 10 Mar 19 07:35:31 localhost kernel: usb.c: USB bus 1 deregistered Mar 19 07:35:37 localhost kernel: usb.c: deregistering driver hiddev Mar 19 07:35:37 localhost kernel: usb.c: deregistering driver hid Mar 19 07:36:19 localhost kernel: usb-uhci.c: $Revision: 1.275 $ time 06:17:44 Mar 14 2003 Mar 19 07:36:19 localhost kernel: usb-uhci.c: High bandwidth mode enabled Mar 19 07:36:19 localhost kernel: usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10 Mar 19 07:36:19 localhost kernel: usb-uhci.c: Detected 2 ports Mar 19 07:36:19 localhost kernel: usb.c: new USB bus registered, assigned bus number 1 Mar 19 07:36:19 localhost kernel: hub.c: USB hub found Mar 19 07:36:19 localhost kernel: hub.c: 2 ports detected Mar 19 07:36:19 localhost kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Mar 19 07:36:20 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 Mar 19 07:36:20 localhost kernel: usb.c: USB device 2 (vend/prod 0x402/0x5621) is not claimed by any active driver. Mar 19 07:36:22 localhost /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0 Mar 19 07:36:22 localhost /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0 Mar 19 07:36:23 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 07:36:23 localhost kernel: Initializing USB Mass Storage driver... Mar 19 07:36:23 localhost kernel: usb.c: registered new driver usb-storage Mar 19 07:36:23 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices Mar 19 07:36:23 localhost kernel: Vendor: HL-DT-ST Model: CD-RW GCE-8160B Rev: 2.08 Mar 19 07:36:23 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02 Mar 19 07:36:23 localhost kernel: USB Mass Storage support registered. Mar 19 07:36:51 localhost kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 Mar 19 07:36:51 localhost kernel: Attached scsi CD-ROM sr1 at scsi1, channel 0, id 0, lun 0 Mar 19 07:36:51 localhost kernel: sr0: scsi-1 drive Mar 19 07:36:51 localhost kernel: Uniform CD-ROM driver Revision: 3.12 Mar 19 07:36:51 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1043 Mar 19 07:36:51 localhost kernel: usb.c: USB disconnect on device 2 Mar 19 07:36:51 localhost kernel: sr1: scsi-1 drive Mar 19 07:36:51 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 3 Mar 19 07:36:55 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 07:37:00 localhost kernel: usb.c: registered new driver hiddev Mar 19 07:37:00 localhost kernel: usb.c: registered new driver hid Mar 19 07:37:00 localhost kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> Mar 19 07:37:00 localhost kernel: hid-core.c: USB HID support drivers Mar 19 07:37:18 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1060 Mar 19 07:37:18 localhost kernel: usb.c: USB disconnect on device 3 Mar 19 07:37:18 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 4 Mar 19 07:37:21 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 07:41:25 localhost kernel: usb.c: USB disconnect on device 4 Mar 19 07:41:46 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 5 Mar 19 07:41:49 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 15:47:19 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1275 Mar 19 15:47:19 localhost kernel: usb.c: USB disconnect on device 5 Mar 19 15:47:19 localhost kernel: sr1: CDROM not ready. Make sure there is a disc in the drive. Mar 19 15:47:19 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 6 Mar 19 15:47:20 localhost kernel: usb.c: USB disconnect on device 6 Mar 19 15:47:20 localhost kernel: Device not ready. Make sure there is a disc in the drive. Mar 19 15:47:20 localhost last message repeated 4 times Mar 19 15:47:21 localhost kernel: sr0: CDROM (ioctl) reports ILLEGAL REQUEST. Mar 19 15:47:21 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0 Mar 19 15:47:21 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 7 Mar 19 15:47:21 localhost kernel: usb-uhci.c: ENXIO 80000780, flags 0, urb cf5a9f00, burb ca26f880 Mar 19 15:47:21 localhost last message repeated 5 times Mar 19 15:47:23 localhost /etc/hotplug/usb.agent: ... no modules for USB product 402/5621/103 Mar 19 15:47:25 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 Mar 19 15:47:27 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 1027 Mar 19 15:47:27 localhost kernel: usb.c: USB disconnect on device 7 Mar 19 15:47:27 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 8 Mar 19 15:47:28 localhost kernel: usb-uhci.c: ENXIO 80000880, flags 0, urb ca26f480, burb ced29280 Mar 19 15:47:28 localhost kernel: usb-uhci.c: ENXIO 80000880, flags 0, urb ca26f480, burb ced29280 Mar 19 15:47:28 localhost kernel: usb-uhci.c: ENXIO 80000880, flags 0, urb c3fd2700, burb ced29280 Mar 19 15:47:28 localhost kernel: scsi2 : SCSI emulation for USB Mass Storage devices Mar 19 15:47:28 localhost kernel: usb-uhci.c: ENXIO 80000800, flags 0, urb c6312300, burb ced29280 Mar 19 15:47:28 localhost last message repeated 2 times Mar 19 15:47:28 localhost kernel: usb.c: USB disconnect on device 8 Mar 19 15:47:29 localhost kernel: hub.c: USB new device connect on bus1/1, assigned device number 9 Mar 19 15:47:29 localhost kernel: usb-uhci.c: ENXIO 80000980, flags 0, urb ca26fd80, burb c8e10980 Mar 19 15:47:29 localhost kernel: usb.c: error getting string descriptor 0 (error=-6) Mar 19 15:47:29 localhost kernel: usb-uhci.c: ENXIO 80000980, flags 0, urb ca26fd80, burb c8e10980 Mar 19 15:47:29 localhost kernel: usb.c: error getting string descriptor 0 (error=-6) Mar 19 15:47:29 localhost kernel: usb-uhci.c: ENXIO 80000980, flags 0, urb ca26fd80, burb c8e10980 Mar 19 15:47:29 localhost kernel: usb-uhci.c: ENXIO 80000980, flags 0, urb ca26fd80, burb c8e10980 Mar 19 15:47:29 localhost kernel: usb.c: error getting string descriptor 0 (error=-6) Mar 19 15:47:29 localhost kernel: usb-uhci.c: ENXIO 80000980, flags 0, urb c8e10980, burb ca26fd80 Mar 19 15:47:29 localhost kernel: usb-uhci.c: ENXIO 80000980, flags 0, urb c8e10980, burb ca26fd80 Mar 19 15:47:31 localhost /etc/hotplug/usb.agent: ... no modules for USB product 402/5621/103 Mar 19 15:47:32 localhost /etc/hotplug/usb.agent: Setup usb-storage for USB product 402/5621/103 MANY messages such as this (without accessing the floppy drive): Mar 19 15:47:56 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 0 Mar 19 15:47:56 localhost kernel: floppy0: disk absent or changed during operation Mar 19 15:47:56 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 2 Mar 19 15:47:56 localhost kernel: floppy0: disk absent or changed during operation Mar 19 15:47:56 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 4 Mar 19 15:47:56 localhost kernel: floppy0: disk absent or changed during operation Mar 19 15:47:56 localhost kernel: end_request: I/O error, dev 02:00 (floppy), sector 6 Mar 19 15:48:40 localhost kernel: Device not ready. Make sure there is a disc in the drive. Mar 19 15:48:40 localhost kernel: Device not ready. Make sure there is a disc in the drive. Mar 19 15:48:42 localhost kernel: sr1: CDROM not ready. Make sure there is a disc in the drive. Mar 19 15:48:43 localhost kernel: Device not ready. Make sure there is a disc in the drive. Mar 19 15:48:43 localhost last message repeated 5 times Mar 19 15:48:43 localhost kernel: sr0: CDROM (ioctl) reports ILLEGAL REQUEST. (followed the the floppy messages again) Hope that helps. Thanks again. __________________________________________________ Do you Yahoo!? Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop! http://platinum.yahoo.com ------------------------------------------------------- This SF.net email is sponsored by: Does your code think in ink? You could win a Tablet PC. Get a free Tablet PC hat just for playing. What are you waiting for? http://ads.sourceforge.net/cgi-bin/redirect.pl?micr5043en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
