Was anything else sharing the interrupt? (if you'd posted /proc/interrupts that would have told everyone).
On Tue, 23 Dec 2003, Ismael Orenstein wrote: > Hey there! > > I'm having a problem connecting my SiPix StyleCam to my PC with USB. > > My configuration is as following: > > Gentoo System, running kernel 2.4.22 > The motherboard is a PC Chips M810, with a Athlon XP processor. > > I've usbcore and usb-ohci compiled as modules, and loaded. The host controller > is indeed a OHCI (at least that's the output of lspci -v|grep HCI) > > When I try to connect my camera to my pc, it doesn't turn on (as it should do, > and does when I'm on windows). The output of dmesg is as following: > > hub.c: new USB device 00:01.2-1, assigned address 2 > usb.c: USB device not accepting new address=2 (error=-110) > hub.c: port 1, portstatus 103, change 10, 12 Mb/s > hub.c: new USB device 00:01.2-1, assigned address 3 > usb.c: USB device not accepting new address=3 (error=-110) > > I've read the FAQ, and it says that I should check /proc/interrupts. I did it, > but the interrupts are increasing (ie, it isn't the problem listed in the > FAQ) > > Anyway, I tried to boot it without APIC, ACPI, APM and all those acronyms, but > it didn't worked. > > As a last resort, I changed the timeout value on usb_set_address to a bigger > value but the error message continued. Changing it to 0 only got me an extra > message: > > hub.c: new USB device 00:01.2-1, assigned address 2 > usb_control/bulk_msg: timeout > usb.c: USB device not accepting new address=2 (error=-110) > hub.c: port 1, portstatus 103, change 10, 12 Mb/s > hub.c: new USB device 00:01.2-1, assigned address 3 > usb_control/bulk_msg: timeout > usb.c: USB device not accepting new address=3 (error=-110) > > Anyway, now I don't know what to do. Inserting the plug slowly in the camera > didn't worked either. > > Thanks for your patience (and a merry christmas for you all!), > > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
