Hi, I have an USB-Stick that seems not suportet by my usb-storage in Kernel 2.4.20-4GB-athlon (suse 8.2).
Could anyone tell me how to get informations to find the right entry in unusual_devs.h? Does anyone know how to use this stick? /proc/bus/usb/devices: T: Bus=03 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=090a ProdID=1bc0 Rev= 1.00 S: Manufacturer=USB S: Product=G Drive Flash Disk C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 4 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=10ms E: Ad=04(O) Atr=03(Int.) MxPS= 8 Ivl=10ms hwinfo --usb: 16: USB 304.0: 10600 Disk [Created at usb.100] Unique ID: B3Fu.3uTZjhSgsD7 Hardware Class: disk Model: "Trumpion Microelectronics Disk" Hotplug: USB Vendor: usb 0x090a "Trumpion Microelectronics Inc." Device: usb 0x1bc0 Revision: "1.00" USB GUID: 090a1bc00000000000000000 USB Device status: no driver loaded Speed: 1.5 Mbps Config Status: cfg=no, avail=yes, need=no Attached to: #14 (Hub) /proc/scsi/scsi: Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: Model: Rev: Type: <NULL> ANSI SCSI revision: ffffffff /var/log/messages: Jan 5 23:04:04 tux kernel: hub.c: port 1, portstatus 100, change 0, 12 Mb/s Jan 5 23:04:04 tux kernel: hub.c: port 2, portstatus 101, change 1, 12 Mb/s Jan 5 23:04:04 tux kernel: hub.c: port 2 connection change Jan 5 23:04:04 tux kernel: hub.c: port 2, portstatus 101, change 1, 12 Mb/s Jan 5 23:04:05 tux kernel: hub.c: port 2, portstatus 101, change 0, 12 Mb/s Jan 5 23:04:05 tux kernel: hub.c: port 2, portstatus 103, change 10, 12 Mb/s Jan 5 23:04:05 tux kernel: hub.c: new USB device 00:02.1-1.2, assigned address 4 Jan 5 23:04:05 tux kernel: usb.c: kmalloc IF d9204340, numif 1 Jan 5 23:04:05 tux kernel: usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0 Jan 5 23:04:05 tux kernel: usb.c: USB device number 4 default language ID 0x409 Jan 5 23:04:05 tux kernel: Manufacturer: USB Jan 5 23:04:05 tux kernel: Product: G Drive Flash Disk Jan 5 23:04:05 tux kernel: usb-storage: act_altsettting is 0 Jan 5 23:04:05 tux kernel: usb-storage: id_index calculated to be: 98 Jan 5 23:04:05 tux kernel: usb-storage: Array length appears to be: 100 Jan 5 23:04:05 tux kernel: usb-storage: USB Mass Storage device detected Jan 5 23:04:05 tux kernel: usb-storage: Endpoints: In: 0xc3e4f4c0 Out: 0xc3e4f4d4 Int: 0xc3e4f4fc (Period 10) Jan 5 23:04:05 tux kernel: usb-storage: New GUID 090a1bc00000000000000000 Jan 5 23:04:05 tux kernel: usb-storage: GetMaxLUN command result is -32, data is 128 Jan 5 23:04:05 tux kernel: usb-storage: clearing endpoint halt for pipe 0x80000480 Jan 5 23:04:10 tux kernel: usb_control/bulk_msg: timeout Jan 5 23:04:10 tux kernel: usb-storage: Transport: Bulk Jan 5 23:04:10 tux kernel: usb-storage: Protocol: Transparent SCSI Jan 5 23:04:10 tux kernel: usb-storage: *** thread sleeping. Jan 5 23:04:10 tux kernel: scsi2 : SCSI emulation for USB Mass Storage devices Jan 5 23:04:10 tux kernel: usb-storage: queuecommand() called Jan 5 23:04:10 tux kernel: usb-storage: *** thread awakened. Jan 5 23:04:10 tux kernel: usb-storage: Command INQUIRY (6 bytes) Jan 5 23:04:10 tux kernel: usb-storage: 12 00 00 00 24 00 5c c6 33 14 1e c0 Jan 5 23:04:10 tux kernel: usb-storage: Bulk command S 0x43425355 T 0x740 Trg 0 LUN 0 L 36 F 128 CL 6 Jan 5 23:04:10 tux kernel: usb-storage: Bulk command transfer result=0 Jan 5 23:04:10 tux kernel: usb-storage: usb_stor_transfer_partial(): xfer 36 bytes Jan 5 23:04:16 tux kernel: usb-storage: command_abort() called Jan 5 23:04:16 tux kernel: usb-storage: usb_stor_bulk_msg() returned -104 xferred 0/36 Jan 5 23:04:16 tux kernel: usb-storage: usb_stor_transfer_partial(): transfer aborted Jan 5 23:04:16 tux kernel: usb-storage: Bulk data transfer result 0x3 Jan 5 23:04:16 tux kernel: usb-storage: -- transport indicates command was aborted Jan 5 23:04:16 tux kernel: usb-storage: scsi command aborted Jan 5 23:04:16 tux kernel: usb-storage: *** thread sleeping. Jan 5 23:04:16 tux kernel: usb-storage: queuecommand() called Jan 5 23:04:16 tux kernel: usb-storage: *** thread awakened. Jan 5 23:04:16 tux kernel: usb-storage: Command TEST_UNIT_READY (6 bytes) Jan 5 23:04:16 tux kernel: usb-storage: 00 00 00 00 00 00 5c c6 33 14 1e c0 Jan 5 23:04:16 tux kernel: usb-storage: Bulk command S 0x43425355 T 0x740 Trg 0 LUN 0 L 0 F 0 CL 6 Jan 5 23:04:26 tux kernel: usb-storage: command_abort() called Jan 5 23:04:26 tux kernel: usb-storage: Bulk command transfer result=-104 Jan 5 23:04:26 tux kernel: usb-storage: -- transport indicates command was aborted Jan 5 23:04:26 tux kernel: usb-storage: scsi command aborted Jan 5 23:04:26 tux kernel: usb-storage: *** thread sleeping. Jan 5 23:04:26 tux kernel: usb-storage: device_reset() called Jan 5 23:04:26 tux kernel: usb-storage: Bulk reset requested Jan 5 23:04:31 tux kernel: usb_control/bulk_msg: timeout Jan 5 23:04:31 tux kernel: usb-storage: Bulk soft reset failed -110 Jan 5 23:04:31 tux kernel: usb-storage: bus_reset() called May it useful to compile a kernel with "CONFIG_USB_DEBUG=y" and/or "CONFIG_USB_STORAGE_DEBUG=y" ? Regards Bernd ------------------------------------------------------- This SF.net email is sponsored by: IBM Linux Tutorials. Become an expert in LINUX or just sharpen your skills. Sign up for IBM's Free Linux Tutorials. Learn everything from the bash shell to sys admin. Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
