It says it is a vendor specific protocol. As the vendor. THe generic serial module does support supplying a vendor and product ID to bind to devices but I have no idea if that would work for this device.
On Mon, 2 Feb 2004, [ISO-8859-1] Fran�ois Chenais wrote: > Hello, > > I just have bought an USB GPRS modem from OLITEC, but it isn't > recognised by my kernel (2.6.0-test1). > > I tried using usbserial module but it fails because of bad product > number. Could you help me ? > > Below, the usb informations about the product. > > > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 > P: Vendor=08e3 ProdID=fffb Rev= 0.00 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > I: If#= 0 Alt= 1 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=10ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=88(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > E: Ad=08(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > I: If#= 0 Alt= 2 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=10ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=88(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms > E: Ad=08(O) Atr=01(Isoc) MxPS= 256 Ivl=1ms > E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms > E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms > > > > TIA > > Fran�ois > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
