Le lun 02/02/2004 � 18:16, Stephen J. Gowdy a �crit : > It says it is a vendor specific protocol. As the vendor. THe generic > the second line (^D: ) means that ?
> serial module does support supplying a vendor and product ID to bind to
> devices but I have no idea if that would work for this device.
>
I asked the vendor to give me the specifications of the protocol. I'm
waiting for is reply.
Thanks a lot.
Fran�ois
> On Mon, 2 Feb 2004, [ISO-8859-1] Franois Chenais wrote:
>
> > Hello,
> >
> > I just have bought an USB GPRS modem from OLITEC, but it isn't
> > recognised by my kernel (2.6.0-test1).
> >
> > I tried using usbserial module but it fails because of bad product
> > number. Could you help me ?
> >
> > Below, the usb informations about the product.
> >
> >
> > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
> > D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
> > P: Vendor=08e3 ProdID=fffb Rev= 0.00
> > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> > I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> > I: If#= 0 Alt= 1 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=10ms
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=88(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> > E: Ad=08(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> > E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> > E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> > E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> > E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> > I: If#= 0 Alt= 2 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> > E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=10ms
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> > E: Ad=88(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms
> > E: Ad=08(O) Atr=01(Isoc) MxPS= 256 Ivl=1ms
> > E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> > E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> > E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> > E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms
> >
> >
> >
> > TIA
> >
> > Franois
> >
>
> --
> /------------------------------------+-------------------------\
> |Stephen J. Gowdy | SLAC, MailStop 34, |
> |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
> |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA |
> |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
> \------------------------------------+-------------------------/
--
Debian SID
Linux tanna 2.6.0-test11 #1 Wed Dec 17 11:45:19 CET 2003 i686 GNU/Linux
Linux Counter #59413
PGP fingerprint : 9AFA 15EC 96C9 F607 EBC1 DD41 70C5 F0E0 25A5 105B
signature.asc
Description: Ceci est une partie de message =?ISO-8859-1?Q?num=E9riquement?= =?ISO-8859-1?Q?_sign=E9e=2E?=
