First, was there a particular reason you CC'ed this to [EMAIL PROTECTED] Second, it looks like your device is choking on the prevent/allow medium removal command, even though it's apparently reporting RMB.
You can probably work around this device bug by editing
linux/drivers/scsi/sd.c to remove all attempt to send prevent/allow
commands -- IIRC, that's only two places in the file, tho I don't recall
exactly where they are at the moment.
Matt
On Mon, Mar 29, 2004 at 04:44:21PM +0100, Javier Marcet wrote:
>
> I'm trying to get an iRIVER iFP-599T aduio player, with the Universal
> Mass Storage firmware.
>
> I've tried with 2.6.1-rc1-mm1 & 2.4.22.
>
> The device is seen, but there is no way to mount it, nor re-partition
> the thing.
>
> I have it working from Windows and MacOS (I tried once on this). At
> first look, it seems there is only one whole partition, but fdisk
> reports 4 mangled ones, and some users who said they got it to work
> under 2.4, explain that the mountable vfat partition under linux is the
> fourth one (/dev/sda4 on my system).
>
> There is no way here. I've recompiled with USBm usb-storage && scsi
> debugging enabled and not as modules, directly into the kernel. For your
> info I'm using udev.
>
> See the attached dmesg, and some info from /proc, if there is anything
> else which could come in handy to find where the problem might be,
> please ask :)
>
> P.S Other than the linux-kernel, please cross-post to my e-mail address
> since I'm not subscribed.
>
>
> --
> Javier Marcet <[EMAIL PROTECTED]>
> cted: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
> bttv0: using: Hauppauge (bt878) [card=10,autodetected]
> bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
> bttv0: Hauppauge eeprom: model=44354, tuner=Temic 4009FR5 (20), radio=yes
> bttv0: using tuner=20
> bttv0: i2c: checking for MSP34xx @ 0x80... found
> msp34xx: init: chip=MSP3415D-B3 +nicam +simple
> msp3410: daemon started
> registering 0-0040
> bttv0: i2c: checking for TDA9875 @ 0xb0... not found
> bttv0: i2c: checking for TDA7432 @ 0x8a... not found
> tvaudio: TV audio decoder + audio/video mux driver
> tvaudio: known chips:
> tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
> (PV951),ta8874z
> tuner: chip found @ 0xc2
> tuner: type set to 20 (Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5))
> registering 0-0061
> bttv0: registered device video0
> bttv0: registered device vbi0
> bttv0: registered device radio0
> bttv0: PLL: 28636363 => 35468950 .. ok
> registering 1-002d
> registering 1-0049
> registering 1-0048
> found reiserfs format "3.6" with standard journal
> Reiserfs journal params: device hda8, size 8192, journal first block 18, max trans
> len 1024, max batch 900, max commit age 30, max trans age 30
> reiserfs: checking transaction log (hda8) for (hda8)
> Using r5 hash to sort names
> found reiserfs format "3.6" with standard journal
> Reiserfs journal params: device hda9, size 8192, journal first block 18, max trans
> len 1024, max batch 900, max commit age 30, max trans age 30
> reiserfs: checking transaction log (hda9) for (hda9)
> b44: eth0: Link is down.
> Using r5 hash to sort names
> found reiserfs format "3.6" with standard journal
> Reiserfs journal params: device hda10, size 8192, journal first block 18, max trans
> len 1024, max batch 900, max commit age 30, max trans age 30
> reiserfs: checking transaction log (hda10) for (hda10)
> Using r5 hash to sort names
> found reiserfs format "3.6" with standard journal
> Reiserfs journal params: device hda11, size 8192, journal first block 18, max trans
> len 1024, max batch 900, max commit age 30, max trans age 30
> reiserfs: checking transaction log (hda11) for (hda11)
> Using r5 hash to sort names
> found reiserfs format "3.6" with standard journal
> b44: eth0: Link is up at 100 Mbps, full duplex.
> b44: eth0: Flow control is on for TX and on for RX.
> Reiserfs journal params: device hda13, size 8192, journal first block 18, max trans
> len 1024, max batch 900, max commit age 30, max trans age 30
> reiserfs: checking transaction log (hda13) for (hda13)
> Using r5 hash to sort names
> PCI: Found IRQ 4 for device 0000:00:11.5
> PCI: Setting latency timer of device 0000:00:11.5 to 64
> tvmixer: MSP3415D-B3 (bt878 #0 [sw]) registered with minor 16
> btaudio: driver version 0.7 loaded [digital+analog]
> PCI: Enabling device 0000:00:0c.1 (0004 -> 0006)
> PCI: Found IRQ 11 for device 0000:00:0c.1
> PCI: Sharing IRQ 11 with 0000:00:0c.0
> btaudio: Bt878 (rev 17) at 00:0c.1, irq: 11, latency: 64, mmio: 0xd6800000
> btaudio: using card config "default"
> btaudio: registered device dsp2 [digital]
> btaudio: registered device dsp3 [analog]
> btaudio: registered device mixer2
> Disabled Privacy Extensions on device c0377a40(lo)
> eth0: no IPv6 routers present
> Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> nfs warning: mount version older than kernel
> request_module: failed /sbin/modprobe -- char-major-226-0. error = 256
> [drm] Initialized radeon 1.9.0 20020828 on minor 0
> agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
> agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
> agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
> agpgart: Putting AGP V2 device at 0000:01:00.1 into 4x mode
> [drm] Loading R200 Microcode
> PCI: Found IRQ 11 for device 0000:01:00.0
> atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
> atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
> ehci_hcd 0000:00:10.3: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT
> hub 1-0:1.0: port 6, status 501, change 1, 480 Mb/s
> hub 1-0:1.0: debounce: port 6: delay 100ms stable 4 status 0x501
> ehci_hcd 0000:00:10.3: port 6 full speed --> companion
> ehci_hcd 0000:00:10.3: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT
> drivers/usb/host/uhci-hcd.c: 9800: wakeup_hc
> hub 4-0:1.0: port 2, status 101, change 1, 12 Mb/s
> hub 4-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101
> hub 4-0:1.0: new USB device on port 2, assigned address 2
> usb 4-2: new device strings: Mfr=0, Product=0, SerialNumber=0
> drivers/usb/core/usb.c: usb_hotplug
> usb 4-2: registering 4-2:1.0 (config #1, interface 0)
> drivers/usb/core/usb.c: usb_hotplug
> usb-storage 4-2:1.0: usb_probe_interface
> usb-storage 4-2:1.0: usb_probe_interface - got id
> usb-storage: USB Mass Storage device detected
> usb-storage: act_altsetting is 0, id_index is 86
> usb-storage: -- associate_dev
> usb-storage: Transport: Bulk
> usb-storage: Protocol: Transparent SCSI
> usb-storage: Endpoints: In: 0xdd291c94 Out: 0xdd291c80 Int: 0x00000000 (Period 0)
> usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
> usb-storage: GetMaxLUN command result is -32, data is 0
> usb-storage: *** thread sleeping.
> scsi2 : SCSI emulation for USB Mass Storage devices
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command INQUIRY (6 bytes)
> usb-storage: 12 00 00 00 24 00
> usb-storage: Bulk Command S 0x43425355 T 0x41 L 36 F 128 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
> usb-storage: Status code 0; transferred 36/36
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x41 R 0 Stat 0x0
> usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command INQUIRY (6 bytes)
> usb-storage: 12 00 00 00 7a 00
> usb-storage: Bulk Command S 0x43425355 T 0x42 L 122 F 128 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 122 bytes
> usb-storage: Status code 0; transferred 122/122
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x42 R 0 Stat 0x0
> usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> Vendor: iRiver Model: iFP Mass Driver Rev: 1.00
> Type: Direct-Access ANSI SCSI revision: 02
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command TEST_UNIT_READY (6 bytes)
> usb-storage: 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x43 L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x43 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_CAPACITY (10 bytes)
> usb-storage: 25 00 00 00 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x44 L 8 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
> usb-storage: Status code 0; transferred 8/8
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x44 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
> sda: assuming Write Enabled
> sda: assuming drive cache: write through
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command TEST_UNIT_READY (6 bytes)
> usb-storage: 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x45 L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x45 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
> usb-storage: 1e 00 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x46 L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x46 R 0 Stat 0x1
> usb-storage: -- transport indicates command failure
> usb-storage: Issuing auto-REQUEST_SENSE
> usb-storage: Bulk Command S 0x43425355 T 0x80000046 L 18 F 128 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
> usb-storage: Status code 0; transferred 18/18
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x80000046 R 0 Stat 0x0
> usb-storage: -- Result from auto-sense is 0
> usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
> usb-storage: Unit Attention: Power on, reset, or bus device reset occurred
> usb-storage: scsi cmd done, result=0x2
> usb-storage: *** thread sleeping.
> sda:<3>Buffer I/O error on device sda, logical block 0
> Buffer I/O error on device sda, logical block 0
> unable to read partition table
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
> usb-storage: 1e 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x47 L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x47 R 0 Stat 0x1
> usb-storage: -- transport indicates command failure
> usb-storage: Issuing auto-REQUEST_SENSE
> usb-storage: Bulk Command S 0x43425355 T 0x80000047 L 18 F 128 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
> usb-storage: Status code 0; transferred 18/18
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x80000047 R 0 Stat 0x0
> usb-storage: -- Result from auto-sense is 0
> usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
> usb-storage: Unit Attention: Power on, reset, or bus device reset occurred
> usb-storage: scsi cmd done, result=0x2
> usb-storage: *** thread sleeping.
> Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
> Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (1:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (2:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (3:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (4:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (5:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (6:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Bad target number (7:0)
> usb-storage: scsi cmd done, result=0x40000
> usb-storage: *** thread sleeping.
> WARNING: USB Mass Storage data integrity not assured
> USB Mass Storage device found at 2
> e 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x12e R 0 Stat 0x1
> usb-storage: -- transport indicates command failure
> usb-storage: Issuing auto-REQUEST_SENSE
> usb-storage: Bulk Command S 0x43425355 T 0x8000012e L 18 F 128 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
> usb-storage: Status code 0; transferred 18/18
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x8000012e R 0 Stat 0x0
> usb-storage: -- Result from auto-sense is 0
> usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
> usb-storage: Unit Attention: Power on, reset, or bus device reset occurred
> usb-storage: scsi cmd done, result=0x2
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command TEST_UNIT_READY (6 bytes)
> usb-storage: 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x12f L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x12f R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command TEST_UNIT_READY (6 bytes)
> usb-storage: 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x130 L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x130 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_CAPACITY (10 bytes)
> usb-storage: 25 00 00 00 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x131 L 8 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
> usb-storage: Status code 0; transferred 8/8
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x131 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
> sda: assuming Write Enabled
> sda: assuming drive cache: write through
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
> usb-storage: 1e 00 00 00 01 00
> usb-storage: Bulk Command S 0x43425355 T 0x132 L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x132 R 0 Stat 0x1
> usb-storage: -- transport indicates command failure
> usb-storage: Issuing auto-REQUEST_SENSE
> usb-storage: Bulk Command S 0x43425355 T 0x80000132 L 18 F 128 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
> usb-storage: Status code 0; transferred 18/18
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x80000132 R 0 Stat 0x0
> usb-storage: -- Result from auto-sense is 0
> usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
> usb-storage: Unit Attention: Power on, reset, or bus device reset occurred
> usb-storage: scsi cmd done, result=0x2
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command TEST_UNIT_READY (6 bytes)
> usb-storage: 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x133 L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x133 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_CAPACITY (10 bytes)
> usb-storage: 25 00 00 00 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x134 L 8 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
> usb-storage: Status code 0; transferred 8/8
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x134 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
> sda: assuming Write Enabled
> sda: assuming drive cache: write through
> sda:<3>Buffer I/O error on device sda, logical block 0
> Buffer I/O error on device sda, logical block 0
> unable to read partition table
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command TEST_UNIT_READY (6 bytes)
> usb-storage: 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x135 L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x135 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command TEST_UNIT_READY (6 bytes)
> usb-storage: 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x136 L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x136 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_CAPACITY (10 bytes)
> usb-storage: 25 00 00 00 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x137 L 8 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
> usb-storage: Status code 0; transferred 8/8
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x137 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
> sda: assuming Write Enabled
> sda: assuming drive cache: write through
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command TEST_UNIT_READY (6 bytes)
> usb-storage: 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x138 L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x138 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_CAPACITY (10 bytes)
> usb-storage: 25 00 00 00 00 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x139 L 8 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
> usb-storage: Status code 0; transferred 8/8
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x139 R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
> sda: assuming Write Enabled
> sda: assuming drive cache: write through
> sda:<7>usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage: 28 00 00 00 00 00 00 00 08 00
> usb-storage: Bulk Command S 0x43425355 T 0x13a L 4096 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
> usb-storage: Status code 0; transferred 4096/4096
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x13a R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> sda1 sda2 sda3 sda4
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command READ_10 (10 bytes)
> usb-storage: 28 00 00 00 00 08 00 00 78 00
> usb-storage: Bulk Command S 0x43425355 T 0x13b L 61440 F 128 Trg 0 LUN 0 CL 10
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_sglist: xfer 61440 bytes, 15 entries
> usb-storage: Status code 0; transferred 61440/61440
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x13b R 0 Stat 0x0
> usb-storage: scsi cmd done, result=0x0
> usb-storage: *** thread sleeping.
> usb-storage: queuecommand called
> usb-storage: *** thread awakened.
> usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
> usb-storage: 1e 00 00 00 00 00
> usb-storage: Bulk Command S 0x43425355 T 0x13c L 0 F 0 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x13c R 0 Stat 0x1
> usb-storage: -- transport indicates command failure
> usb-storage: Issuing auto-REQUEST_SENSE
> usb-storage: Bulk Command S 0x43425355 T 0x8000013c L 18 F 128 Trg 0 LUN 0 CL 6
> usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
> usb-storage: Status code 0; transferred 31/31
> usb-storage: -- transfer complete
> usb-storage: Bulk command transfer result=0
> usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
> usb-storage: Status code 0; transferred 18/18
> usb-storage: -- transfer complete
> usb-storage: Bulk data transfer result 0x0
> usb-storage: Attempting to get CSW...
> usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
> usb-storage: Status code 0; transferred 13/13
> usb-storage: -- transfer complete
> usb-storage: Bulk status result = 0
> usb-storage: Bulk Status S 0x53425355 T 0x8000013c R 0 Stat 0x0
> usb-storage: -- Result from auto-sense is 0
> usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
> usb-storage: Unit Attention: Power on, reset, or bus device reset occurred
> usb-storage: scsi cmd done, result=0x2
> usb-storage: *** thread sleeping.
>
> T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.1-rc1-mm1 uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:10.2
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=4102 ProdID=1105 Rev= 1.00
> C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
> E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>
> T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.1-rc1-mm1 uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:10.1
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.1-rc1-mm1 uhci_hcd
> S: Product=UHCI Host Controller
> S: SerialNumber=0000:00:10.0
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
>
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
> B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 2.06
> S: Manufacturer=Linux 2.6.1-rc1-mm1 ehci_hcd
> S: Product=EHCI Host Controller
> S: SerialNumber=0000:00:10.3
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
> Attached devices:
> Host: scsi2 Channel: 00 Id: 00 Lun: 00
> Vendor: iRiver Model: iFP Mass Driver Rev: 1.00
> Type: Direct-Access ANSI SCSI revision: 02
> Host scsi2: usb-storage
> Vendor: Unknown
> Product: Unknown
> Serial Number: None
> Protocol: Transparent SCSI
> Transport: Bulk
> Quirks:
>
> Disk /dev/sda: 1048 MB, 1048576000 bytes
> 33 heads, 61 sectors/track, 1017 cylinders
> Units = cylinders of 2013 * 512 = 1030656 bytes
>
> Device Boot Start End Blocks Id System
> /dev/sda1 ? 386556 953625 570754815+ 72 Unknown
> Partition 1 has different physical/logical beginnings (non-Linux?):
> phys=(357, 116, 40) logical=(386555, 11, 23)
> Partition 1 has different physical/logical endings:
> phys=(357, 32, 45) logical=(953624, 6, 61)
> Partition 1 does not end on cylinder boundary.
> /dev/sda2 ? 83801 1045563 968014120 65 Novell Netware 386
> Partition 2 has different physical/logical beginnings (non-Linux?):
> phys=(288, 115, 43) logical=(83800, 2, 1)
> Partition 2 has different physical/logical endings:
> phys=(367, 114, 50) logical=(1045562, 23, 53)
> Partition 2 does not end on cylinder boundary.
> /dev/sda3 ? 928903 1890666 968014096 79 Unknown
> Partition 3 has different physical/logical beginnings (non-Linux?):
> phys=(366, 32, 33) logical=(928902, 28, 32)
> Partition 3 has different physical/logical endings:
> phys=(357, 32, 43) logical=(1890665, 16, 36)
> Partition 3 does not end on cylinder boundary.
> /dev/sda4 ? 1 1806869 1818613248 d Unknown
> Partition 4 has different physical/logical beginnings (non-Linux?):
> phys=(372, 97, 50) logical=(0, 0, 1)
> Partition 4 has different physical/logical endings:
> phys=(0, 10, 0) logical=(1806868, 19, 53)
> Partition 4 does not end on cylinder boundary.
>
> Partition table entries are not in disk order
--
Matthew Dharm Home: [EMAIL PROTECTED]
Maintainer, Linux USB Mass Storage Driver
Da. Am thinkink of carbonated borscht for lonk nights of coding.
-- Pitr
User Friendly, 7/24/1998
pgp00000.pgp
Description: PGP signature
