On Mon, 2004-06-21 at 12:06, Alan Stern wrote: > On Mon, 21 Jun 2004, Zan Lynx wrote: > > > I am not subscribed to the list. Please CC replies to me. Thanks. > > > > I am using a Logitech MX700 mouse, attached to the onboard USB > > controller of a VIA motherboard. Apparently at random, the mouse will > > stop sending events, or the USB controller stops receiving them. > > > > This only started when I upgraded from kernel 2.6.5 to 2.6.7. I have > > another system running kernel 2.6.7 on a different computer using a > > Logitech MX900 mouse with a OPTi USB controller and it has no problems, > > so I suspect that the VIA controller driver is the problem. > > > > I can make the mouse start working again by doing cat > > /sys/bus/usb/devices/2-2/product. > > > > Now I'll attach all the messy details that REPORTING-BUGS says to > > include. :-) > > > > Thanks for your time. > > What would really help is if you send the dmesg output for the time when > your mouse stops responding. > > The fact that you can get it working again suggests that this is not a > problem with the controller driver but rather with the HID driver. Or > maybe with the mouse itself. Have you tried attaching your MX700 mouse to > that other computer? > > Alan Stern >
No, there is nothing in dmesg. I looked. I don't see how it could be a mouse problem when it works with kernel 2.6.5 and randomly freezes with 2.6.7. If you really want to see dmesg anyway, I have attached it. -- Zan Lynx <[EMAIL PROTECTED]>
Linux version 2.6.7 ([EMAIL PROTECTED]) (gcc version 3.3.3 20040412 (Red Hat Linux
3.3.3-7)) #3 Thu Jun 17 10:15:29 MDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa2c0
ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0000
ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0030
ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000
Built 1 zonelists
Kernel command line: ro root=/dev/md1 rootfstype=reiserfs single
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1659.712 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 515696k/524224k available (2257k kernel code, 7764k reserved, 907k data, 160k
init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3284.99 BogoMIPS
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2000+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1659.0341 MHz.
..... host bus clock speed is 265.0494 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control
Methods:................................................................................................................................................
Table [DSDT](id F004) - 413 Objects with 41 Devices 144 Methods 18 Regions
ACPI Namespace successfully loaded at root c046403c
ACPI: IRQ9 SCI: Edge set to Level Trigger.
evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful
evgpeblk-0867 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at
0000000000000820 on int 9
evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 9 Runtime GPEs in
this block
evgpeblk-0867 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE] 2 regs at
0000000000000830 on int 9
evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 0 Runtime GPEs in
this block
spurious 8259A interrupt: IRQ7.
Completing Region/Field/Buffer/Package
initialization:........................................................................................
Initialized 18/18 Regions 5/5 Fields 35/35 Buffers 30/30 Packages (422 nodes)
Executing all Device _STA and_INI methods:...........................................
43 Devices found containing: 43 _STA, 1 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS18 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 12 14 15)
SCSI subsystem initialized
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
Machine check exception polling timer started.
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1)
Real Time Clock Driver v1.12
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS735 ATA 100 (2nd gen) controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hdc: Pioneer DVD-ROM ATAPIModel DVD-116 0122, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
sym0: <1010-33> rev 0x1 at pci 0000:00:11.0 irq 11
sym0: using 64 bit DMA addressing
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: SCAN AT BOOT disabled for targets 3 4 5 6 8 9 10 11 12 13 14 15.
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18j
Vendor: SEAGATE Model: ST318453LW Rev: 0005
Type: Direct-Access ANSI SCSI revision: 03
sym0:0:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:0:0): Beginning Domain Validation
sym0:0: wide asynchronous.
sym0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
scsi(0:0:0:0): Ending Domain Validation
Vendor: SEAGATE Model: ST318453LW Rev: 0006
Type: Direct-Access ANSI SCSI revision: 03
sym0:1:0: tagged command queuing enabled, command queue depth 16.
scsi(0:0:1:0): Beginning Domain Validation
sym0:1: wide asynchronous.
sym0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62)
scsi(0:0:1:0): Ending Domain Validation
sym1: <1010-33> rev 0x1 at pci 0000:00:11.1 irq 10
sym1: using 64 bit DMA addressing
sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: SCAN AT BOOT disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15.
sym1: SCSI BUS has been reset.
scsi1 : sym-2.1.18j
SCSI device sda: 35843686 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 35843686 512-byte hdwr sectors (18352 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3 sdb4
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
BIOS EDD facility v0.15 2004-May-17, 4 devices found
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdb4 ...
md: adding sdb4 ...
md: sdb3 has different UUID to sdb4
md: sdb1 has different UUID to sdb4
md: adding sda4 ...
md: sda3 has different UUID to sdb4
md: sda1 has different UUID to sdb4
md: created md2
md: bind<sda4>
md: bind<sdb4>
md: running: <sdb4><sda4>
md2: setting max_sectors to 2048, segment boundary to 524287
raid0: looking at sdb4
raid0: comparing sdb4(13478912) with sdb4(13478912)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda4
raid0: comparing sda4(13478912) with sdb4(13478912)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 26957824 blocks.
raid0 : conf->hash_spacing is 26957824 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: considering sdb3 ...
md: adding sdb3 ...
md: sdb1 has different UUID to sdb3
md: adding sda3 ...
md: sda1 has different UUID to sdb3
md: created md1
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
md1: setting max_sectors to 2048, segment boundary to 524287
raid0: looking at sdb3
raid0: comparing sdb3(3906560) with sdb3(3906560)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda3
raid0: comparing sda3(3906560) with sdb3(3906560)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 7813120 blocks.
raid0 : conf->hash_spacing is 7813120 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
ReiserFS: md1: found reiserfs format "3.6" with standard journal
ReiserFS: md1: using ordered data mode
ReiserFS: md1: journal params: device md1, size 8192, journal first block 18, max
trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md1: checking transaction log (md1)
ReiserFS: md1: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 160k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:13.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:13.0: irq 11, io base 0000bc00
uhci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:13.0: detected 2 ports
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: default language 0x0409
usb usb1: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
usb usb1: Manufacturer: Linux 2.6.7 uhci_hcd
usb usb1: SerialNumber: 0000:00:13.0
usb usb1: hotplug
usb usb1: adding 1-0:1.0 (config #1, interface 0)
usb 1-0:1.0: hotplug
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: no power switching (usb 1.0)
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 2ms
hub 1-0:1.0: local power source is good
uhci_hcd 0000:00:13.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:13.1: irq 11, io base 0000c000
uhci_hcd 0000:00:13.0: port 1 portsc 018a
hub 1-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s
uhci_hcd 0000:00:13.0: port 2 portsc 008a
hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s
uhci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:13.1: detected 2 ports
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: default language 0x0409
usb usb2: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
usb usb2: Manufacturer: Linux 2.6.7 uhci_hcd
usb usb2: SerialNumber: 0000:00:13.1
usb usb2: hotplug
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: individual port over-current protection
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: local power source is good
uhci_hcd 0000:00:13.0: port 1 portsc 0188
hub 1-0:1.0: port 1 enable change, status 00000300
uhci_hcd 0000:00:13.0: port 2 portsc 0088
hub 1-0:1.0: port 2 enable change, status 00000100
uhci_hcd 0000:00:13.1: port 1 portsc 008a
hub 2-0:1.0: port 1, status 0100, change 0003, 12 Mb/s
uhci_hcd 0000:00:13.1: port 2 portsc 01ab
hub 2-0:1.0: port 2, status 0301, change 0003, 1.5 Mb/s
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
ehci_hcd 0000:00:13.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:13.2: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4
ehci_hcd 0000:00:13.2: reset hcc_params 0002 thresh 0 uframes 256/512/1024
ehci_hcd 0000:00:13.2: irq 10, pci mem e08cfa00
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
ehci_hcd 0000:00:13.2: supports USB remote wakeup
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: default language 0x0409
usb usb3: Product: VIA Technologies, Inc. USB 2.0
usb usb3: Manufacturer: Linux 2.6.7 ehci_hcd
usb usb3: SerialNumber: 0000:00:13.2
usb usb3: hotplug
usb usb3: adding 3-0:1.0 (config #1, interface 0)
usb 3-0:1.0: hotplug
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: ganged power switching
hub 3-0:1.0: individual port over-current protection
hub 3-0:1.0: Single TT
hub 3-0:1.0: TT requires at most 8 FS bit times
hub 3-0:1.0: power on to power good time: 20ms
hub 3-0:1.0: local power source is good
hub 3-0:1.0: enabling power on all ports
uhci_hcd 0000:00:13.1: port 2 portsc 01aa
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED]
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
uhci_hcd 0000:00:13.1: port 2 portsc 01a8
hub 2-0:1.0: debounce: port 2: delay 400ms stable 0 status 0x300
hub 2-0:1.0: connect-debounce failed, port 2 disabled
ehci_hcd 0000:00:13.2: GetStatus port 4 status 001403 POWER sig=k CSC CONNECT
hub 3-0:1.0: port 4, status 0501, change 0001, 480 Mb/s
hub 3-0:1.0: debounce: port 4: delay 100ms stable 4 status 0x501
ehci_hcd 0000:00:13.2: port 4 low speed --> companion
ehci_hcd 0000:00:13.2: GetStatus port 4 status 003402 POWER OWNER sig=k CSC
uhci_hcd 0000:00:13.1: port 1 portsc 0088
hub 2-0:1.0: port 1 enable change, status 00000100
uhci_hcd 0000:00:13.1: port 2 portsc 01ab
hub 2-0:1.0: port 2, status 0301, change 0003, 1.5 Mb/s
uhci_hcd 0000:00:13.1: port 2 portsc 01a9
uhci_hcd 0000:00:13.1: hc_state_transitions - UHCI_SUSPENDING_GRACE back to RUNNING
uhci_hcd 0000:00:13.1: port 2 portsc 01a9
uhci_hcd 0000:00:13.1: port 2 portsc 01a9
uhci_hcd 0000:00:13.1: port 2 portsc 01a9
uhci_hcd 0000:00:13.1: port 2 portsc 01a9
hub 2-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x301
uhci_hcd 0000:00:13.1: hc_state_transitions - UHCI_SUSPENDING_GRACE back to RUNNING
usb 2-2: new low speed USB device using address 2
usb 2-2: skipped 1 descriptor after interface
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: default language 0x0409
usb 2-2: Product: USB Receiver
usb 2-2: Manufacturer: Logitech
usb 2-2: hotplug
usb 2-2: adding 2-2:1.0 (config #1, interface 0)
usb 2-2:1.0: hotplug
uhci_hcd 0000:00:13.0: hc_state_transitions - UHCI_SUSPENDING_GRACE expired: suspending
uhci_hcd 0000:00:13.0: suspend_hc
usbhid 2-2:1.0: usb_probe_interface
usbhid 2-2:1.0: usb_probe_interface - got id
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:13.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Adding 500728k swap on /dev/sda2. Priority:1 extents:1
Adding 500728k swap on /dev/sdb2. Priority:1 extents:1
EXT2-fs warning (device md0): ext2_fill_super: mounting ext3 filesystem as ext2
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
ip_tables: (C) 2000-2002 Netfilter core team
sis900.c: v1.08.07 11/02/2003
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd000, IRQ 3, 00:0a:e6:a7:29:60.
eth0: Media Link On 100mbps full-duplex
via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
eth1: VIA VT86C100A Rhine at 0xc800, 00:80:c8:e7:3c:24, IRQ 3.
eth1: MII PHY found at address 8, status 0x7809 advertising 05e1 Link 0000.
e100: Intel(R) PRO/100 Network Driver, 3.0.18
e100: Copyright(c) 1999-2004 Intel Corporation
e100: eth2: e100_probe: addr 0xc58ff000, irq 11, MAC addr 00:A0:C9:8D:0C:7E
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03d50a0(lo)
IPv6 over IPv4 tunneling driver
intel8x0_measure_ac97_clock: measured 49473 usecs
intel8x0: clocking to 48000
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
eth0: no IPv6 routers present
eth2: no IPv6 routers present
hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
usb 2-2: usbfs: process 3924 (lsusb) did not claim interface 0 before use
usb 2-2: usbfs: process 3928 (lsusb) did not claim interface 0 before use
signature.asc
Description: This is a digitally signed message part
