On Thu, 5 Aug 2004, Christof Hurschler wrote: > I thought you might be interested in a similar problem I'm having. > > I've also got an external HD USB 2.0 enclosure that works, but only if I rmmod > ehci_hcd i.e. slowly in legacy mode. Otherwise it works fine. > > It is listed as: > > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=05e3 ProdID=0702 Rev= 0.02 > S: Manufacturer=Genesyslogic > S: Product=USB Mass Storage Device > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 4mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
Enclosures using Genesys Logic interfaces have caused trouble for a long time. Just recently we got some information that has led to a solution. Presumably it will be in place when 2.6.8-final comes out; in the meantime the patch you need to apply is in this message: http://marc.theaimsgroup.com/?l=linux-usb-devel&m=108938736229333&q=raw Alan Stern ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
