Hello there. I am trying to use a Kensignton VideoCAM model 67014 with Linux. I bought these particularly because they're supported by the Video4Linux drivers.
If they're supported by V4L, they probably work with USB, or did work with USB. When I plug my camera in, I see no change to the usb devices. I get the following errors in syslog: Aug 13 19:50:50 EricksonL-dock kernel: usb 2-1: new full speed USB device using address 7 Aug 13 19:50:50 EricksonL-dock kernel: drivers/usb/core/config.c: invalid alternate setting 8 for interface 0 Aug 13 19:50:50 EricksonL-dock kernel: usb 2-1: can't read configurations, error -22 Aug 13 19:50:50 EricksonL-dock kernel: usb 2-1: new full speed USB device using address 8 Aug 13 19:50:50 EricksonL-dock kernel: drivers/usb/core/config.c: invalid alternate setting 8 for interface 0 Aug 13 19:50:50 EricksonL-dock kernel: usb 2-1: can't read configurations, error -22 I have no idea what might be causing this. Other things on my USB work fine. This machine is a laptop. It has USB 1.1 built in, and a USB 2.0 PCMCIA card. I get this exact same error from both sets of USB ports. Any help in getting this camera working would be very appreciated. Thank you very much! -- Louis Erickson - [EMAIL PROTECTED] - http://www.rdwarf.com/~wwonko/ MESSAGE ACKNOWLEDGED -- The Pershing II missiles have been launched. ------------------------------------------------------- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
