On Fri, 20 Aug 2004, Mike R. wrote: > I've rebooted my system several times since you informed that I should > wait. No problems! :) Time from device insertion to module insertion? I > would wait the entire 30 seconds, which is about how long I waited > (could have been longer.) > > If I had some detailed specs on this device, I might be able to get an > exact number. Unfortunately, I can't find an FCC ID number anywhere on > it, or I'd hunt around on the FCC's website for information. Note to > anybody else reading this: FCC ID numbers are _very_ useful when > searching for hardware specifications.
Don't worry about official specs; just do the experiment and see what works. So 30 seconds delay is good. Try 20 seconds, then 15, then 10, then 5... I realize you can't be very precise about the time between pushing in a plug and pressing the Enter key, but do the best you can. > Another thing. Hotplug shouldn't interfere with this, as long as I > blacklist the module name, right? Right. > What about ACPI? I disabled both in > the time I've been troubleshooting. I don't think ACPI has anything to do with this. It shouldn't matter if you turn it on. Alan Stern ------------------------------------------------------- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
