* On 04.10. Alan Stern muttered: > here's a new version updated for 2.6.8.1. Tell me how it works out.
Thanks for the patch. I applied it and rebooted my box. debian:/etc # lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 When I switch the camera on I get this: </var/log/kern.log> Oct 4 23:13:42 debian kernel: ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT Oct 4 23:13:42 debian kernel: hub 4-0:1.0: port 4, status 0501, change 0001, 480 Mb/s Oct 4 23:13:42 debian kernel: hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501 Oct 4 23:13:42 debian kernel: hub 4-0:1.0: port 4 not reset yet, waiting 50ms Oct 4 23:13:42 debian kernel: ehci_hcd 0000:00:1d.7: port 4 full speed --> companion Oct 4 23:13:42 debian kernel: ehci_hcd 0000:00:1d.7: GetStatus port 4 status 003801 POWER OWNER sig=j CONNECT Oct 4 23:13:42 debian kernel: uhci_hcd 0000:00:1d.1: wakeup_hc Oct 4 23:13:42 debian kernel: uhci_hcd 0000:00:1d.1: port 2 portsc 0083 Oct 4 23:13:42 debian kernel: hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s Oct 4 23:13:42 debian kernel: hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 Oct 4 23:13:42 debian kernel: usb 2-2: new full speed USB device using address 2 Oct 4 23:13:43 debian kernel: usb 2-2: device not accepting address 2, error -32 Oct 4 23:13:43 debian kernel: usb 2-2: new full speed USB device using address 3 Oct 4 23:13:43 debian kernel: usb 2-2: device not accepting address 3, error -32 Oct 4 23:13:43 debian kernel: usb 2-2: new full speed USB device using address 4 Oct 4 23:13:44 debian kernel: usb 2-2: device descriptor read/8, error -90 Oct 4 23:13:44 debian kernel: usb 2-2: new full speed USB device using address 5 Oct 4 23:13:44 debian kernel: usb 2-2: device descriptor read/8, error -90 </ /var/log/kern.log> During boottime I got this: </var/log/kern.log> Oct 4 23:13:16 debian kernel: usbcore: registered new driver usbfs Oct 4 23:13:16 debian kernel: usbcore: registered new driver hub Oct 4 23:13:16 debian kernel: USB Universal Host Controller Interface driver v2.2 Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1 Oct 4 23:13:16 debian kernel: PCI: Setting latency timer of device 0000:00:1d.0 to 64 Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.0: irq 9, io base 00001000 Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.0: detected 2 ports Oct 4 23:13:16 debian kernel: usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 Oct 4 23:13:16 debian kernel: usb usb1: default language 0x0409 Oct 4 23:13:16 debian kernel: usb usb1: Product: Intel Corp. 82801DB (ICH4) USB UHCI #1 Oct 4 23:13:16 debian kernel: usb usb1: Manufacturer: Linux 2.6.8.1 uhci_hcd Oct 4 23:13:16 debian kernel: usb usb1: SerialNumber: 0000:00:1d.0 Oct 4 23:13:16 debian kernel: usb usb1: hotplug Oct 4 23:13:16 debian kernel: usb usb1: adding 1-0:1.0 (config #1, interface 0) Oct 4 23:13:16 debian kernel: usb 1-0:1.0: hotplug Oct 4 23:13:16 debian kernel: hub 1-0:1.0: usb_probe_interface Oct 4 23:13:16 debian kernel: hub 1-0:1.0: usb_probe_interface - got id Oct 4 23:13:16 debian kernel: hub 1-0:1.0: USB hub found Oct 4 23:13:16 debian kernel: hub 1-0:1.0: 2 ports detected Oct 4 23:13:16 debian kernel: hub 1-0:1.0: standalone hub Oct 4 23:13:16 debian kernel: hub 1-0:1.0: no power switching (usb 1.0) Oct 4 23:13:16 debian kernel: hub 1-0:1.0: individual port over-current protection Oct 4 23:13:16 debian kernel: hub 1-0:1.0: power on to power good time: 2ms Oct 4 23:13:16 debian kernel: hub 1-0:1.0: local power source is good Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2 Oct 4 23:13:16 debian kernel: PCI: Setting latency timer of device 0000:00:1d.1 to 64 Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.1: irq 11, io base 00001400 Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.1: detected 2 ports Oct 4 23:13:16 debian kernel: usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 Oct 4 23:13:16 debian kernel: usb usb2: default language 0x0409 Oct 4 23:13:16 debian kernel: usb usb2: Product: Intel Corp. 82801DB (ICH4) USB UHCI #2 Oct 4 23:13:16 debian kernel: usb usb2: Manufacturer: Linux 2.6.8.1 uhci_hcd Oct 4 23:13:16 debian kernel: usb usb2: SerialNumber: 0000:00:1d.1 Oct 4 23:13:16 debian kernel: usb usb2: hotplug Oct 4 23:13:16 debian kernel: usb usb2: adding 2-0:1.0 (config #1, interface 0) Oct 4 23:13:16 debian kernel: usb 2-0:1.0: hotplug Oct 4 23:13:16 debian kernel: hub 2-0:1.0: usb_probe_interface Oct 4 23:13:16 debian kernel: hub 2-0:1.0: usb_probe_interface - got id Oct 4 23:13:16 debian kernel: hub 2-0:1.0: USB hub found Oct 4 23:13:16 debian kernel: hub 2-0:1.0: 2 ports detected Oct 4 23:13:16 debian kernel: hub 2-0:1.0: standalone hub Oct 4 23:13:16 debian kernel: hub 2-0:1.0: no power switching (usb 1.0) Oct 4 23:13:16 debian kernel: hub 2-0:1.0: individual port over-current protection Oct 4 23:13:16 debian kernel: hub 2-0:1.0: power on to power good time: 2ms Oct 4 23:13:16 debian kernel: hub 2-0:1.0: local power source is good Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3 Oct 4 23:13:16 debian kernel: PCI: Setting latency timer of device 0000:00:1d.2 to 64 Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.2: irq 9, io base 00001800 Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.2: detected 2 ports Oct 4 23:13:16 debian kernel: usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 Oct 4 23:13:16 debian kernel: usb usb3: default language 0x0409 Oct 4 23:13:16 debian kernel: usb usb3: Product: Intel Corp. 82801DB (ICH4) USB UHCI #3 Oct 4 23:13:16 debian kernel: usb usb3: Manufacturer: Linux 2.6.8.1 uhci_hcd Oct 4 23:13:16 debian kernel: usb usb3: SerialNumber: 0000:00:1d.2 Oct 4 23:13:16 debian kernel: usb usb3: hotplug Oct 4 23:13:16 debian kernel: usb usb3: adding 3-0:1.0 (config #1, interface 0) Oct 4 23:13:16 debian kernel: usb 3-0:1.0: hotplug Oct 4 23:13:16 debian kernel: hub 3-0:1.0: usb_probe_interface Oct 4 23:13:16 debian kernel: hub 3-0:1.0: usb_probe_interface - got id Oct 4 23:13:16 debian kernel: hub 3-0:1.0: USB hub found Oct 4 23:13:16 debian kernel: hub 3-0:1.0: 2 ports detected Oct 4 23:13:16 debian kernel: hub 3-0:1.0: standalone hub Oct 4 23:13:16 debian kernel: hub 3-0:1.0: no power switching (usb 1.0) Oct 4 23:13:16 debian kernel: hub 3-0:1.0: individual port over-current protection Oct 4 23:13:16 debian kernel: hub 3-0:1.0: power on to power good time: 2ms Oct 4 23:13:16 debian kernel: hub 3-0:1.0: local power source is good Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.0: suspend_hc Oct 4 23:13:16 debian kernel: ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 Oct 4 23:13:16 debian kernel: ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller Oct 4 23:13:16 debian kernel: ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 Oct 4 23:13:16 debian kernel: ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr Oct 4 23:13:16 debian kernel: ehci_hcd 0000:00:1d.7: capability 0001 at 68 Oct 4 23:13:16 debian kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64 Oct 4 23:13:16 debian kernel: ehci_hcd 0000:00:1d.7: irq 10, pci mem e0903000 Oct 4 23:13:16 debian kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 Oct 4 23:13:16 debian kernel: ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Oct 4 23:13:16 debian kernel: PCI: cache line size of 128 is not supported by device 0000:00:1d.7 Oct 4 23:13:16 debian kernel: ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN Oct 4 23:13:16 debian kernel: ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 Oct 4 23:13:16 debian kernel: ehci_hcd 0000:00:1d.7: supports USB remote wakeup Oct 4 23:13:16 debian kernel: usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 Oct 4 23:13:16 debian kernel: usb usb4: default language 0x0409 Oct 4 23:13:16 debian kernel: usb usb4: Product: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller Oct 4 23:13:16 debian kernel: usb usb4: Manufacturer: Linux 2.6.8.1 ehci_hcd Oct 4 23:13:16 debian kernel: usb usb4: SerialNumber: 0000:00:1d.7 Oct 4 23:13:16 debian kernel: usb usb4: hotplug Oct 4 23:13:16 debian kernel: usb usb4: adding 4-0:1.0 (config #1, interface 0) Oct 4 23:13:16 debian kernel: usb 4-0:1.0: hotplug Oct 4 23:13:16 debian kernel: hub 4-0:1.0: usb_probe_interface Oct 4 23:13:16 debian kernel: hub 4-0:1.0: usb_probe_interface - got id Oct 4 23:13:16 debian kernel: hub 4-0:1.0: USB hub found Oct 4 23:13:16 debian kernel: hub 4-0:1.0: 6 ports detected Oct 4 23:13:16 debian kernel: hub 4-0:1.0: standalone hub Oct 4 23:13:16 debian kernel: hub 4-0:1.0: ganged power switching Oct 4 23:13:16 debian kernel: hub 4-0:1.0: individual port over-current protection Oct 4 23:13:16 debian kernel: hub 4-0:1.0: Single TT Oct 4 23:13:16 debian kernel: hub 4-0:1.0: TT requires at most 8 FS bit times Oct 4 23:13:16 debian kernel: hub 4-0:1.0: power on to power good time: 20ms Oct 4 23:13:16 debian kernel: hub 4-0:1.0: local power source is good Oct 4 23:13:16 debian kernel: hub 4-0:1.0: enabling power on all ports Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.1: suspend_hc Oct 4 23:13:16 debian kernel: uhci_hcd 0000:00:1d.2: suspend_hc </ /var/log/kern.log> What else can I do? TIA Til ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
