On Tue, 28 Dec 2004, Sven Lösekann wrote: > Hello Alan, > > I have activated usb debugging and usb storage debugging. The output of > dmesg after plugging in is: > > dmesg: > hub 3-0:1.0: state 5 ports 6 chg ffc0 evt 0004 > ehci_hcd 0000:00:03.2: GetStatus port 2 status 001803 POWER sig=j CSC > CONNECT > hub 3-0:1.0: port 2, status 0501, change 0001, 480 Mb/s > hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 > ehci_hcd 0000:00:03.2: port 2 high speed > ehci_hcd 0000:00:03.2: GetStatus port 2 status 001005 POWER sig=se0 PE > CONNECT > usb 3-2: new high speed USB device using ehci_hcd and address 4 > > After I disconnect the stick I get no entries. If more information is > needed I will be trying to provide it.
There ought to be more information than that! If you do Alt-SysRq-T to get a stack trace, what does the entry for the khubd process show? Alan Stern ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://productguide.itmanagersjournal.com/ _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
