I recently bought a USB 2.0 enclosure for a 2.5" hard drive. It works OK with a 2.4.21 kernel when I boot from an old Knoppix CD, but when used with a 2.6 kernel it just gives a clicking noise every now and then. I tried both a recent Knoppix and my usual Gentoo with a few different kernels (2.6.17, 2.6.16, 2.6.8). I have tried different values for delay_use.
When googling I noticed quite a lot of problems in the past with Genesys GL811E . But as far as I could see it should be working now. Can anybody confirm this? I have turned on debugging in the kernel. Hopefully somebody can point me in the right direction. Yours, Søren Aug 19 22:44:54 sioux hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0008 Aug 19 22:44:54 sioux ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT Aug 19 22:44:54 sioux hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s Aug 19 22:44:54 sioux hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 Aug 19 22:44:54 sioux ehci_hcd 0000:00:1d.7: port 3 high speed Aug 19 22:44:54 sioux ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT Aug 19 22:44:54 sioux usb 1-3: new high speed USB device using ehci_hcd and address 2 Aug 19 22:44:54 sioux ehci_hcd 0000:00:1d.7: port 3 high speed Aug 19 22:44:54 sioux ehci_hcd 0000:00:1d.7: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT Aug 19 22:44:54 sioux usb 1-3: default language 0x0409 Aug 19 22:44:54 sioux usb 1-3: new device strings: Mfr=0, Product=1, SerialNumber=0 Aug 19 22:44:54 sioux usb 1-3: Product: USB TO IDE Aug 19 22:44:54 sioux usb 1-3: uevent Aug 19 22:44:54 sioux usb 1-3: configuration #1 chosen from 1 choice Aug 19 22:44:54 sioux usb 1-3: adding 1-3:1.0 (config #1, interface 0) Aug 19 22:44:54 sioux usb 1-3:1.0: uevent Aug 19 22:44:54 sioux usb-storage 1-3:1.0: usb_probe_interface Aug 19 22:44:54 sioux usb-storage 1-3:1.0: usb_probe_interface - got id Aug 19 22:44:54 sioux usb-storage: USB Mass Storage device detected Aug 19 22:44:54 sioux usb-storage: -- associate_dev Aug 19 22:44:54 sioux usb-storage: Vendor: 0x05e3, Product: 0x0702, Revision: 0x0033 Aug 19 22:44:54 sioux usb-storage: Interface Subclass: 0x06, Protocol: 0x50 Aug 19 22:44:54 sioux usb-storage: Transport: Bulk Aug 19 22:44:54 sioux usb-storage: Protocol: Transparent SCSI Aug 19 22:44:54 sioux scsi0 : SCSI emulation for USB Mass Storage devices Aug 19 22:44:54 sioux usb-storage: *** thread sleeping. Aug 19 22:44:54 sioux drivers/usb/core/inode.c: creating file '002' Aug 19 22:44:54 sioux usb-storage: device found at 2 Aug 19 22:44:54 sioux usb-storage: waiting for device to settle before scanning Aug 19 22:45:04 sioux usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 Aug 19 22:45:04 sioux usb-storage: GetMaxLUN command result is 1, data is 0 Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Command INQUIRY (6 bytes) Aug 19 22:45:04 sioux usb-storage: 12 00 00 00 24 00 Aug 19 22:45:04 sioux usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 36/36 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk data transfer result 0x0 Aug 19 22:45:04 sioux usb-storage: Attempting to get CSW... Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 13/13 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk status result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0 Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x0 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux Vendor: FUJITSU Model: MHT2040AT Rev: 0811 Aug 19 22:45:04 sioux Type: Direct-Access ANSI SCSI revision: 00 Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Command TEST_UNIT_READY (6 bytes) Aug 19 22:45:04 sioux usb-storage: 00 00 00 00 00 00 Aug 19 22:45:04 sioux usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:04 sioux usb-storage: Attempting to get CSW... Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 13/13 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk status result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0 Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x0 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Command READ_CAPACITY (10 bytes) Aug 19 22:45:04 sioux usb-storage: 25 00 00 00 00 00 00 00 00 00 Aug 19 22:45:04 sioux usb-storage: Bulk Command S 0x43425355 T 0x3 L 8 F 128 Trg 0 LUN 0 CL 10 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 8/8 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk data transfer result 0x0 Aug 19 22:45:04 sioux usb-storage: Attempting to get CSW... Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 13/13 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk status result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0 Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x0 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Command MODE_SENSE (6 bytes) Aug 19 22:45:04 sioux usb-storage: 1a 00 3f 00 c0 00 Aug 19 22:45:04 sioux usb-storage: Bulk Command S 0x43425355 T 0x4 L 192 F 128 Trg 0 LUN 0 CL 6 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries Aug 19 22:45:04 sioux usb-storage: Status code -32; transferred 0/192 Aug 19 22:45:04 sioux usb-storage: clearing endpoint halt for pipe 0xc0008280 Aug 19 22:45:04 sioux usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 Aug 19 22:45:04 sioux usb-storage: usb_stor_clear_halt: result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk data transfer result 0x2 Aug 19 22:45:04 sioux usb-storage: Attempting to get CSW... Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 13/13 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk status result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk Status S 0x53425355 T 0x4 R 192 Stat 0x1 Aug 19 22:45:04 sioux usb-storage: -- transport indicates command failure Aug 19 22:45:04 sioux usb-storage: Issuing auto-REQUEST_SENSE Aug 19 22:45:04 sioux usb-storage: Bulk Command S 0x43425355 T 0x5 L 18 F 128 Trg 0 LUN 0 CL 6 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 18/18 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk data transfer result 0x0 Aug 19 22:45:04 sioux usb-storage: Attempting to get CSW... Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 13/13 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk status result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0 Aug 19 22:45:04 sioux usb-storage: -- Result from auto-sense is 0 Aug 19 22:45:04 sioux usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0 Aug 19 22:45:04 sioux usb-storage: (Unknown Key): (unknown ASC/ASCQ) Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x2 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux sda: test WP failed, assume Write Enabled Aug 19 22:45:04 sioux sda: assuming drive cache: write through Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Command TEST_UNIT_READY (6 bytes) Aug 19 22:45:04 sioux usb-storage: 00 00 00 00 00 00 Aug 19 22:45:04 sioux usb-storage: Bulk Command S 0x43425355 T 0x6 L 0 F 0 Trg 0 LUN 0 CL 6 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:04 sioux usb-storage: Attempting to get CSW... Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 13/13 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk status result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0 Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x0 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Command READ_CAPACITY (10 bytes) Aug 19 22:45:04 sioux usb-storage: 25 00 00 00 00 00 00 00 00 00 Aug 19 22:45:04 sioux usb-storage: Bulk Command S 0x43425355 T 0x7 L 8 F 128 Trg 0 LUN 0 CL 10 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 8/8 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk data transfer result 0x0 Aug 19 22:45:04 sioux usb-storage: Attempting to get CSW... Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 13/13 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk status result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0 Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x0 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Command MODE_SENSE (6 bytes) Aug 19 22:45:04 sioux usb-storage: 1a 00 3f 00 c0 00 Aug 19 22:45:04 sioux usb-storage: Bulk Command S 0x43425355 T 0x8 L 192 F 128 Trg 0 LUN 0 CL 6 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries Aug 19 22:45:04 sioux usb-storage: Status code -32; transferred 0/192 Aug 19 22:45:04 sioux usb-storage: clearing endpoint halt for pipe 0xc0008280 Aug 19 22:45:04 sioux usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 Aug 19 22:45:04 sioux usb-storage: usb_stor_clear_halt: result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk data transfer result 0x2 Aug 19 22:45:04 sioux usb-storage: Attempting to get CSW... Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 13/13 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk status result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk Status S 0x53425355 T 0x8 R 192 Stat 0x1 Aug 19 22:45:04 sioux usb-storage: -- transport indicates command failure Aug 19 22:45:04 sioux usb-storage: Issuing auto-REQUEST_SENSE Aug 19 22:45:04 sioux usb-storage: Bulk Command S 0x43425355 T 0x9 L 18 F 128 Trg 0 LUN 0 CL 6 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 18/18 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk data transfer result 0x0 Aug 19 22:45:04 sioux usb-storage: Attempting to get CSW... Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 13/13 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk status result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x0 Aug 19 22:45:04 sioux usb-storage: -- Result from auto-sense is 0 Aug 19 22:45:04 sioux usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0 Aug 19 22:45:04 sioux usb-storage: (Unknown Key): (unknown ASC/ASCQ) Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x2 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux sda: test WP failed, assume Write Enabled Aug 19 22:45:04 sioux sda: assuming drive cache: write through Aug 19 22:45:04 sioux sda:<7>usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Command READ_10 (10 bytes) Aug 19 22:45:04 sioux usb-storage: 28 00 00 00 00 00 00 00 08 00 Aug 19 22:45:04 sioux usb-storage: Bulk Command S 0x43425355 T 0xa L 4096 F 128 Trg 0 LUN 0 CL 10 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 4096/4096 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk data transfer result 0x0 Aug 19 22:45:04 sioux usb-storage: Attempting to get CSW... Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 13/13 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk status result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x0 Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x0 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux sda1 sda2 sda3 sda4 Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Command READ_10 (10 bytes) Aug 19 22:45:04 sioux usb-storage: 28 00 01 26 28 b0 00 00 08 00 Aug 19 22:45:04 sioux usb-storage: Bulk Command S 0x43425355 T 0xb L 4096 F 128 Trg 0 LUN 0 CL 10 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 4096/4096 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk data transfer result 0x0 Aug 19 22:45:04 sioux usb-storage: Attempting to get CSW... Aug 19 22:45:04 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Aug 19 22:45:04 sioux usb-storage: Status code 0; transferred 13/13 Aug 19 22:45:04 sioux usb-storage: -- transfer complete Aug 19 22:45:04 sioux usb-storage: Bulk status result = 0 Aug 19 22:45:04 sioux usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0 Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x0 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux sd 0:0:0:0: Attached scsi disk sda Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Bad LUN (0:1) Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x40000 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Bad target number (1:0) Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x40000 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Bad target number (2:0) Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x40000 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Bad target number (3:0) Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x40000 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Bad target number (4:0) Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x40000 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Bad target number (5:0) Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x40000 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Bad target number (6:0) Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x40000 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux usb-storage: queuecommand called Aug 19 22:45:04 sioux usb-storage: *** thread awakened. Aug 19 22:45:04 sioux usb-storage: Bad target number (7:0) Aug 19 22:45:04 sioux usb-storage: scsi cmd done, result=0x40000 Aug 19 22:45:04 sioux usb-storage: *** thread sleeping. Aug 19 22:45:04 sioux usb-storage: device scan complete Aug 19 22:45:04 sioux scsi.agent[11590]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/host0/target0:0:0/0:0:0:0 Aug 19 22:45:05 sioux usb-storage: queuecommand called Aug 19 22:45:05 sioux usb-storage: *** thread awakened. Aug 19 22:45:05 sioux usb-storage: Command READ_10 (10 bytes) Aug 19 22:45:05 sioux usb-storage: 28 00 00 01 77 bf 00 00 08 00 Aug 19 22:45:05 sioux usb-storage: Bulk Command S 0x43425355 T 0xc L 4096 F 128 Trg 0 LUN 0 CL 10 Aug 19 22:45:05 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:05 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:05 sioux usb-storage: -- transfer complete Aug 19 22:45:05 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:05 sioux usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries Aug 19 22:45:05 sioux usb-storage: Status code 0; transferred 4096/4096 Aug 19 22:45:05 sioux usb-storage: -- transfer complete Aug 19 22:45:05 sioux usb-storage: Bulk data transfer result 0x0 Aug 19 22:45:05 sioux usb-storage: Attempting to get CSW... Aug 19 22:45:05 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Aug 19 22:45:05 sioux usb-storage: Status code 0; transferred 13/13 Aug 19 22:45:05 sioux usb-storage: -- transfer complete Aug 19 22:45:05 sioux usb-storage: Bulk status result = 0 Aug 19 22:45:05 sioux usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0 Aug 19 22:45:05 sioux usb-storage: scsi cmd done, result=0x0 Aug 19 22:45:05 sioux usb-storage: *** thread sleeping. Aug 19 22:45:05 sioux usb-storage: queuecommand called Aug 19 22:45:05 sioux usb-storage: *** thread awakened. Aug 19 22:45:05 sioux usb-storage: Command READ_10 (10 bytes) Aug 19 22:45:05 sioux usb-storage: 28 00 01 26 28 06 00 00 08 00 Aug 19 22:45:05 sioux usb-storage: Bulk Command S 0x43425355 T 0xd L 4096 F 128 Trg 0 LUN 0 CL 10 Aug 19 22:45:05 sioux usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Aug 19 22:45:05 sioux usb-storage: Status code 0; transferred 31/31 Aug 19 22:45:05 sioux usb-storage: -- transfer complete Aug 19 22:45:05 sioux usb-storage: Bulk command transfer result=0 Aug 19 22:45:05 sioux usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries Aug 19 22:45:05 sioux ehci_hcd 0000:00:1d.7: fatal command 010021 (park)=0 ithresh=1 Async period=1024 RUN Aug 19 22:45:05 sioux ehci_hcd 0000:00:1d.7: fatal status 8008 Async FLR Aug 19 22:45:05 sioux uhci_hcd 0000:00:1d.0: wakeup_rh (auto-start) Aug 19 22:45:05 sioux hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0002 Aug 19 22:45:05 sioux uhci_hcd 0000:00:1d.0: port 1 portsc 0c80,00 Aug 19 22:45:05 sioux hub 2-0:1.0: over-current change on port 1 Aug 19 22:45:05 sioux ehci_hcd 0000:00:1d.7: devpath 3 ep1in 3strikes Aug 19 22:45:05 sioux usb-storage: Status code -71; transferred 0/4096 Aug 19 22:45:05 sioux usb-storage: -- unknown error Aug 19 22:45:05 sioux usb-storage: Bulk data transfer result 0x4 Aug 19 22:45:05 sioux usb-storage: -- transport indicates error, resetting Aug 19 22:45:05 sioux ehci_hcd 0000:00:1d.7: port 3 full speed --> companion Aug 19 22:45:05 sioux ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003001 POWER OWNER sig=se0 CONNECT Aug 19 22:45:05 sioux hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0002 Aug 19 22:45:05 sioux ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001020 POWER sig=se0 OCC Aug 19 22:45:05 sioux hub 1-0:1.0: over-current change on port 1 Aug 19 22:45:05 sioux ehci_hcd 0000:00:1d.7: port 3 full speed --> companion Aug 19 22:45:05 sioux ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003001 POWER OWNER sig=se0 CONNECT Aug 19 22:45:05 sioux ehci_hcd 0000:00:1d.7: port 3 full speed --> companion Aug 19 22:45:05 sioux ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003001 POWER OWNER sig=se0 CONNECT Aug 19 22:45:05 sioux ehci_hcd 0000:00:1d.7: port 3 full speed --> companion Aug 19 22:45:05 sioux ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003001 POWER OWNER sig=se0 CONNECT Aug 19 22:45:05 sioux hub 1-0:1.0: logical disconnect on port 3 Aug 19 22:45:05 sioux usb-storage: usb_reset_device returns -19 Aug 19 22:45:05 sioux usb-storage: usb_stor_Bulk_reset called Aug 19 22:45:05 sioux usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 Aug 19 22:45:05 sioux usb-storage: Soft reset failed: -19 Aug 19 22:45:05 sioux usb-storage: scsi cmd done, result=0x70000 Aug 19 22:45:05 sioux usb-storage: *** thread sleeping. Aug 19 22:45:05 sioux hub 1-0:1.0: state 7 ports 6 chg 0008 evt 0000 Aug 19 22:45:05 sioux hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s Aug 19 22:45:05 sioux usb 1-3: USB disconnect, address 2 Aug 19 22:45:05 sioux usb 1-3: usb_disable_device nuking all URBs Aug 19 22:45:05 sioux usb 1-3: unregistering interface 1-3:1.0 Aug 19 22:45:05 sioux usb-storage: storage_disconnect() called Aug 19 22:45:05 sioux usb-storage: usb_stor_stop_transport called Aug 19 22:45:05 sioux usb-storage: queuecommand called Aug 19 22:45:05 sioux usb-storage: Fail command during disconnect Aug 19 22:45:05 sioux sd 0:0:0:0: SCSI error: return code = 0x10000 Aug 19 22:45:05 sioux end_request: I/O error, dev sda, sector 19277830 Aug 19 22:45:05 sioux Buffer I/O error on device sda2, logical block 9590720 Aug 19 22:45:05 sioux sd 0:0:0:0: rejecting I/O to device being removed Aug 19 22:45:05 sioux Buffer I/O error on device sda2, logical block 9590721 Aug 19 22:45:05 sioux Buffer I/O error on device sda2, logical block 9590722 Aug 19 22:45:05 sioux Buffer I/O error on device sda2, logical block 9590723 Aug 19 22:45:05 sioux usb-storage: queuecommand called Aug 19 22:45:05 sioux usb-storage: Fail command during disconnect Aug 19 22:45:05 sioux sd 0:0:0:0: rejecting I/O to device being removed Aug 19 22:45:05 sioux Buffer I/O error on device sda4, logical block 56853888 Aug 19 22:45:05 sioux Buffer I/O error on device sda4, logical block 56853889 Aug 19 22:45:05 sioux Buffer I/O error on device sda4, logical block 56853890 Aug 19 22:45:05 sioux Buffer I/O error on device sda4, logical block 56853891 Aug 19 22:45:05 sioux Buffer I/O error on device sda4, logical block 56853892 Aug 19 22:45:05 sioux Buffer I/O error on device sda4, logical block 56853893 Aug 19 22:45:05 sioux sd 0:0:0:0: rejecting I/O to device being removed Aug 19 22:45:05 sioux sd 0:0:0:0: SCSI error: return code = 0x10000 Aug 19 22:45:05 sioux end_request: I/O error, dev sda, sector 21285936 Aug 19 22:45:05 sioux sd 0:0:0:0: rejecting I/O to device being removed Aug 19 22:45:05 sioux usb-storage: -- usb_stor_release_resources Aug 19 22:45:05 sioux usb-storage: -- sending exit command to thread Aug 19 22:45:05 sioux usb-storage: -- dissociate_dev Aug 19 22:45:05 sioux usb 1-3:1.0: uevent Aug 19 22:45:05 sioux usb 1-3: unregistering device Aug 19 22:45:05 sioux usb 1-3: uevent Aug 19 22:45:05 sioux usb-storage: *** thread awakened. Aug 19 22:45:05 sioux usb-storage: -- exiting Aug 19 22:45:05 sioux 0:0:0:0: rejecting I/O to dead device Aug 19 22:45:05 sioux 0:0:0:0: rejecting I/O to dead device ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
