On Wed, Apr 19, 2000 at 12:43:33AM +0200, Vegard Engen wrote:
> I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> I: If#= 0 Alt= 1 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl= 10ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
>
> E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=88(I) Atr=01(Isoc) MxPS= 16 Ivl= 1ms
> E: Ad=08(O) Atr=01(Isoc) MxPS= 16 Ivl= 1ms
> E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl= 1ms
> E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl= 1ms
> E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl= 1ms
> E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl= 1ms
> I: If#= 0 Alt= 2 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl= 10ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=88(I) Atr=01(Isoc) MxPS= 256 Ivl= 1ms
> E: Ad=08(O) Atr=01(Isoc) MxPS= 256 Ivl= 1ms
> E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl= 1ms
> E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl= 1ms
> E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl= 1ms
> E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl= 1ms
This looks like the device uses the Anchor Chip for the USB side. This
means that you need the firmware to be downloaded to the device before
it will be useful.
good luck,
greg k-h
[EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
