Pavel,
What's a "case" in this message?
~Randy
> I get this on usb elsa 56K with JE's uhci, in 50% of cases...
>
> uhci.c: uhci_result_control() failed with status 440000
> URB [c38775a0] urbp [c11ef044]
> QH [c11ed0b0]
> td 0: [c11ee0a0]
> 011ee2a0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0
> Dev=4, PID=2d(SETUP) (buf=011e5c10)
> td 1: [c11ee2a0]
> 011ee260 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4,
> PID=69(IN) (buf=0387a6b8)
> td 2: [c11ee260]
> 011ee120 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=4,
> PID=69(IN) (buf=0387a6c0)
> td 3: [c11ee120]
> 011ee1e0 e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=4,
> PID=69(IN) (buf=0387a6c8)
> td 4: [c11ee1e0]
> 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4,
> PID=e1(OUT) (buf=00000000)
>
> Other 50% it works okay. Maybe some timeout is too short for elsa?
>
> It works quite okay with A-UHCI, it gets initialized twice (I can see
> it on leds), but otherwise okay.
> Pavel
>
> --
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
