Hi!
I get this on usb elsa 56K with JE's uhci, in 50% of cases...
uhci.c: uhci_result_control() failed with status 440000
URB [c38775a0] urbp [c11ef044]
QH [c11ed0b0]
td 0: [c11ee0a0]
011ee2a0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0
Dev=4, PID=2d(SETUP) (buf=011e5c10)
td 1: [c11ee2a0]
011ee260 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4,
PID=69(IN) (buf=0387a6b8)
td 2: [c11ee260]
011ee120 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=4,
PID=69(IN) (buf=0387a6c0)
td 3: [c11ee120]
011ee1e0 e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=4,
PID=69(IN) (buf=0387a6c8)
td 4: [c11ee1e0]
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4,
PID=e1(OUT) (buf=00000000)
Other 50% it works okay. Maybe some timeout is too short for elsa?
It works quite okay with A-UHCI, it gets initialized twice (I can see
it on leds), but otherwise okay.
Pavel
--
I'm [EMAIL PROTECTED] "In my country we have almost anarchy and I don't care."
Panos Katsaloulis describing me w.r.t. patents me at [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
