Hi!
> > I get this on usb elsa 56K with JE's uhci, in 50% of cases...
> >
> > uhci.c: uhci_result_control() failed with status 440000
> > URB [c38775a0] urbp [c11ef044]
> > QH [c11ed0b0]
> > td 0: [c11ee0a0]
> > 011ee2a0 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0
> > Dev=4, PID=2d(SETUP) (buf=011e5c10)
> > td 1: [c11ee2a0]
> > 011ee260 e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4,
> > PID=69(IN) (buf=0387a6b8)
> > td 2: [c11ee260]
> > 011ee120 e3 SPD Active Length=0 MaxLen=7 DT0 EndPt=0 Dev=4,
> > PID=69(IN) (buf=0387a6c0)
> > td 3: [c11ee120]
> > 011ee1e0 e3 SPD Active Length=0 MaxLen=1 DT1 EndPt=0 Dev=4,
> > PID=69(IN) (buf=0387a6c8)
> > td 4: [c11ee1e0]
> > 00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4,
> > PID=e1(OUT) (buf=00000000)
> >
> > Other 50% it works okay. Maybe some timeout is too short for elsa?
>
> That error is a hard error from the HC. It tried to send the packet 3
> times and got no response or only garbled responses.
>
> > It works quite okay with A-UHCI, it gets initialized twice (I can see
> > it on leds), but otherwise okay.
>
> Randy has reported a similar problem with a device he has. I worked on
> it for a little bit but I haven't created a patch.
As another datapoint, this device worked pretty well before (2.3.40
times), with both uhcis.
Pavel
--
The best software in life is free (not shareware)! Pavel
GCM d? s-: !g p?:+ au- a--@ w+ v- C++@ UL+++ L++ N++ E++ W--- M- Y- R+
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
