So, I tried version 0.2.1 of the Kawasaki-ethernet driver with my D-Link
DSB-650. Definite progress, but apparently no cigar. The device still does
not actually work. Good progress guys, I live in hope!
Richard Melrose
/proc/bus/usb/devices: (extension hub and mouse + D-Link)
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=fce0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 7
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0451 ProdID=1446 Rev= 1.00
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0461 ProdID=4d04 Rev= 4.41
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl= 10ms
T: Bus=01 Lev=02 Prnt=02 Port=06 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0557 ProdID=2002 Rev= 0.02
S: Manufacturer=ATEN Inc.
S: Product=USB-Ethernet
S: SerialNumber=00107400278D
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 90mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=kaweth
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 1ms
dmesg output on plugging the device into the extension hub, using usb-uhci, after
loading kaweth.o:
hub.c: port 7 connection change
hub.c: portstatus 101, change 1, 12 Mb/s
hub.c: portstatus 103, change 10, 12 Mb/s
usb.c: USB new device connect, assigned device number 4
usb.c: kmalloc IF c2f88cc0, numif 1
usb.c: new device strings: Mfr=2, Product=3, SerialNumber=1
usb.c: USB device number 4 default language ID 0x409
Manufacturer: ATEN Inc.
Product: USB-Ethernet
SerialNumber: 00107400278D
Kawasaki Device Probe (Device number:4): 0x0557:0x2002
Device at c7390ec0
Descriptor length: 12 type: 1
D-Link DSB-650 connected...
Reading kaweth configuration
Request type: c0 Request: 0 Value: 0 Index: 0 Length: 12
usb-uhci.c: interrupt, status 2, frame# 337
kaweth control message failed (urb addr: c5839d40)
Actual length: 0, length 18
Resetting...
Downloading firmware at c881c098 to kaweth device at c34ba000...
Firmware length: 3838
Request type: 40 Request: ff Value: 0 Index: 0 Length: efe
Actual length: 3838, length 3838
Downloading firmware at c881cf96 to kaweth device at c34ba000...
Firmware length: 720
Request type: 40 Request: ff Value: 0 Index: 0 Length: 2d0
Actual length: 720, length 720
Triggering firmware
Request type: 40 Request: ff Value: 0 Index: 0 Length: 8
Actual length: 8, length 8
Resetting device (jiffies: 19072b)...
Reset device (jiffies: 19072d)...
Reading kaweth configuration
Request type: c0 Request: 0 Value: 0 Index: 0 Length: 12
Actual length: 18, length 18
Statitstics collection: 0
Multicast filter limit: 80
MTU: 5ea
Read MAC address 00:10:74:00:27:8d
:12::00::00::00::10::74::00::27::8d::00::00::00::00::ea::05::80::00::00:
Setting URB size to 1664
Request type: 40 Request: 8 Value: 680 Index: 0 Length: 0
Actual length: 0, length 0
Set SOFS wait to 5
Request type: 40 Request: 9 Value: 5 Index: 0 Length: 0
Actual length: 0, length 0
Set recieve filter to 28
Request type: 40 Request: 2 Value: 1c Index: 0 Length: 0
Actual length: 0, length 0
Initializing net device...
kaweth interface created at eth0
Kaweth probe returning...
usb.c: kaweth driver claimed interface c2f88cc0
Dev usage: 1
Opening network device...
Setting Rx mode
Failed to set Rx mode: -16
Setting Rx mode
Failed to set Rx mode: -16
Setting Rx mode
Failed to set Rx mode: -16
Setting Rx mode
Failed to set Rx mode: -16
Dev usage: 1
Dev usage: 1
Opening network device...
Setting Rx mode
Failed to set Rx mode: -16
Setting Rx mode
Failed to set Rx mode: -16
Setting Rx mode
Failed to set Rx mode: -16
Dev usage: 1
Dev usage: 1
Opening network device...
Setting Rx mode
Failed to set Rx mode: -16
Setting Rx mode
Failed to set Rx mode: -16
Setting Rx mode
Failed to set Rx mode: -16
Dev usage: 1
Dev usage: 1
Opening network device...
Setting Rx mode
Failed to set Rx mode: -16
Setting Rx mode
Failed to set Rx mode: -16
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
