When I was using the Kaweth 0.2 driver patched to recognize a 3Com network
device, I had to experiment with the order of boot, plug in device, and load
kaweth module. Sometimes the device would be recognized and the firmware
would download but the startup would fail, as it is failing for you.
Possible orders:
1. Boot without device, insmod module manually, plug in device.
2. Boot with device plugged in, insmod module manually.
3. Boot without device, plug in device, insmod module manually.
(Can't remember which of these actually worked :^) )
-- SP
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> Sent: Monday, June 05, 2000 5:56 PM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]
> Subject: Re: [linux-usb] Kaweth driver
>
>
> So, I tried version 0.2.1 of the Kawasaki-ethernet driver
> with my D-Link
> DSB-650. Definite progress, but apparently no cigar. The
> device still does
> not actually work. Good progress guys, I live in hope!
>
> Richard Melrose
>
> /proc/bus/usb/devices: (extension hub and mouse + D-Link)
>
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB UHCI Root Hub
> S: SerialNumber=fce0
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 7
> D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0451 ProdID=1446 Rev= 1.00
> C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
> T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0
> D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0461 ProdID=4d04 Rev= 4.41
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
> E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl= 10ms
> T: Bus=01 Lev=02 Prnt=02 Port=06 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0557 ProdID=2002 Rev= 0.02
> S: Manufacturer=ATEN Inc.
> S: Product=USB-Ethernet
> S: SerialNumber=00107400278D
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 90mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=kaweth
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 1ms
>
> dmesg output on plugging the device into the extension hub,
> using usb-uhci, after
> loading kaweth.o:
>
> hub.c: port 7 connection change
> hub.c: portstatus 101, change 1, 12 Mb/s
> hub.c: portstatus 103, change 10, 12 Mb/s
> usb.c: USB new device connect, assigned device number 4
> usb.c: kmalloc IF c2f88cc0, numif 1
> usb.c: new device strings: Mfr=2, Product=3, SerialNumber=1
> usb.c: USB device number 4 default language ID 0x409
> Manufacturer: ATEN Inc.
> Product: USB-Ethernet
> SerialNumber: 00107400278D
> Kawasaki Device Probe (Device number:4): 0x0557:0x2002
> Device at c7390ec0
> Descriptor length: 12 type: 1
> D-Link DSB-650 connected...
> Reading kaweth configuration
> Request type: c0 Request: 0 Value: 0 Index: 0 Length: 12
> usb-uhci.c: interrupt, status 2, frame# 337
> kaweth control message failed (urb addr: c5839d40)
> Actual length: 0, length 18
> Resetting...
> Downloading firmware at c881c098 to kaweth device at c34ba000...
> Firmware length: 3838
> Request type: 40 Request: ff Value: 0 Index: 0 Length: efe
> Actual length: 3838, length 3838
> Downloading firmware at c881cf96 to kaweth device at c34ba000...
> Firmware length: 720
> Request type: 40 Request: ff Value: 0 Index: 0 Length: 2d0
> Actual length: 720, length 720
> Triggering firmware
> Request type: 40 Request: ff Value: 0 Index: 0 Length: 8
> Actual length: 8, length 8
> Resetting device (jiffies: 19072b)...
> Reset device (jiffies: 19072d)...
> Reading kaweth configuration
> Request type: c0 Request: 0 Value: 0 Index: 0 Length: 12
> Actual length: 18, length 18
> Statitstics collection: 0
> Multicast filter limit: 80
> MTU: 5ea
> Read MAC address 00:10:74:00:27:8d
> :12::00::00::00::10::74::00::27::8d::00::00::00::00::ea::05::8
> 0::00::00:
> Setting URB size to 1664
> Request type: 40 Request: 8 Value: 680 Index: 0 Length: 0
> Actual length: 0, length 0
> Set SOFS wait to 5
> Request type: 40 Request: 9 Value: 5 Index: 0 Length: 0
> Actual length: 0, length 0
> Set recieve filter to 28
> Request type: 40 Request: 2 Value: 1c Index: 0 Length: 0
> Actual length: 0, length 0
> Initializing net device...
> kaweth interface created at eth0
> Kaweth probe returning...
> usb.c: kaweth driver claimed interface c2f88cc0
> Dev usage: 1
> Opening network device...
> Setting Rx mode
> Failed to set Rx mode: -16
> Setting Rx mode
> Failed to set Rx mode: -16
> Setting Rx mode
> Failed to set Rx mode: -16
> Setting Rx mode
> Failed to set Rx mode: -16
> Dev usage: 1
> Dev usage: 1
> Opening network device...
> Setting Rx mode
> Failed to set Rx mode: -16
> Setting Rx mode
> Failed to set Rx mode: -16
> Setting Rx mode
> Failed to set Rx mode: -16
> Dev usage: 1
> Dev usage: 1
> Opening network device...
> Setting Rx mode
> Failed to set Rx mode: -16
> Setting Rx mode
> Failed to set Rx mode: -16
> Setting Rx mode
> Failed to set Rx mode: -16
> Dev usage: 1
> Dev usage: 1
> Opening network device...
> Setting Rx mode
> Failed to set Rx mode: -16
> Setting Rx mode
> Failed to set Rx mode: -16
>
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
