Re: Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws error during enumeration on 3.4 kernel.

[VIKAS SAJJAN C]

Hi Andiry,

Thanks for the reply.

If I connect the USB 2.0 Device directly to the USB 3.0 Port (without the SS 
Hub ), it works fine.
It even works fine if i connect the same USB 2.0 Device through a SS Hub 
connected to USB 2.0 port (EHCI root hub).

the Problem comes if i connect the same USB 2.0 Device through a SS Hub 
connected to USB 3.0 port (XHCI root hub).


Regards
Vikas Sajjan

------- Original Message -------
Sender : Andiry Xu<andiry...@amd.com> 
Date   : Jul 13, 2012 16:29 (GMT+09:00)
Title  : Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws
 error during enumeration on 3.4 kernel.

On 07/13/2012 02:49 PM, VIKAS SAJJAN C wrote:
> Hi ,
> I am working on 3.4 kernel , when i try to connect a USB 2.0 device on Super 
> Speed HUB , i get following error.
>
> usb 3-1.1: Device not responding to set address.
> usb 3-1.1: device not accepting address 3, error -71
>
> any inputs will be of great help.
>
> Thanks and Regards
> Vikas Sajjan¢éì¹»®&Þ~º&¶¬–+-±éݶ¥Šw®žË›±Êâmébžìn±¸§¶›¡Ü¨}©ž²Æ 
> zÚ&j:+v‰¨¾«‘êçzZ+€Ê+zf£¢·hšˆ§~†­†Ûiÿûàz¹®w¥¢¸?™¨è­Ú&¢)ߢf

The address command is rejected by the device. What happens if you plug 
the device to EHCI controller or to xHCI root hub (without the SS hub)?

Thanks,
Andiry

N‹§²æìr¸›yúèšØb²X¬¶Ç§vØ^–)Þº{.nÇ+‰·¥Š{±ºÆâžØ^n‡r¡ö¦zË�ëh™¨è­Ú&¢ø®G«�éh®(­éšŽŠÝ¢j"�ú¶m§ÿï�êäz¹Þ–Šàþf£¢·hšˆ§~ˆmš