Re: Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws error during enumeration on 3.4 kernel.

[VIKAS SAJJAN C]

Hi Andiry,


1. xHCI root hub --- SS hub --- some other USB 2.0 devices  
   ----- I tired with 2 more usb 2.0 devices , same error comes.

2. xHCI root hub --- some other SS hub or HS hub  --- the same USB2.0 device
------ i connected xHCI root hub -->HS hub--> the same 2.0 device , it works 
fine.

          I dont have another SS hub to check with.

please find the attachement fot the log.

Regards
Vikas Sajjan

------- Original Message -------
Sender : Andiry Xu<andiry...@amd.com> 
Date   : Jul 13, 2012 17:11 (GMT+09:00)
Title  : Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws
 error during enumeration on 3.4 kernel.

On 07/13/2012 03:50 PM, VIKAS SAJJAN C wrote:
> Hi Andiry,
>
> Thanks for the reply.
>
> If I connect the USB 2.0 Device directly to the USB 3.0 Port (without the SS 
> Hub ), it works fine.
> It even works fine if i connect the same USB 2.0 Device through a SS Hub 
> connected to USB 2.0 port (EHCI root hub).
>
> the Problem comes if i connect the same USB 2.0 Device through a SS Hub 
> connected to USB 3.0 port (XHCI root hub).
>

When a SS hub is connected to EHCI, it just works like a HS hub. No 
address device command is issued.

Can you post the output of lsusb -vvvv and lspci -vvnn?

And what occurs with the following two scnearios:

1. xHCI root hub --- SS hub --- some other USB 2.0 devices
2. xHCI root hub --- some other SS hub or HS hub  --- the same USB2.0 device

Thanks,
Andiry


>
> ------- Original Message -------
> Sender : Andiry Xu<andiry...@amd.com>
> Date   : Jul 13, 2012 16:29 (GMT+09:00)
> Title  : Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port 
> throws
>   error during enumeration on 3.4 kernel.
>
> On 07/13/2012 02:49 PM, VIKAS SAJJAN C wrote:
>> Hi ,
>> I am working on 3.4 kernel , when i try to connect a USB 2.0 device on Super 
>> Speed HUB , i get following error.
>>
>> usb 3-1.1: Device not responding to set address.
>> usb 3-1.1: device not accepting address 3, error -71
>>
>> any inputs will be of great help.
>>
>> Thanks and Regards
>> Vikas Sajjan¢éì¹»®&Þ~º&¶¬–+-±éݶ¥Šw®žË›±Êâmébžìn±¸§¶›¡Ü¨}©ž²Æ 
>> zÚ&j:+v‰¨¾«‘êçzZ+€Ê+zf£¢·hšˆ§~†­†Ûiÿûàz¹®w¥¢¸?™¨è­Ú&¢)ߢf
>
> The address command is rejected by the device. What happens if you plug
> the device to EHCI controller or to xHCI root hub (without the SS hub)?
>
> Thanks,
> Andiry
>

lsusb.txt
Description: Binary data