Owner, group and others can view and modify content of the
/media/cdrecorder folder (from viewing the permissions in konqueror).
As for the /dev/hdd file, it is owner can read and write, group and
others are forbidden.
Not sure if this is what you want - to be honest I don't really
understand your question as far as the difference between the device and
the mount point (if the above isn't what you wanted). How can I get
this information from the command line?
Nick Rout wrote:
Sounds like you have a permission problem. So tell us what the ownership
& permissions are on the device and mount point.
On Sun, 2005-06-05 at 18:51 +1200, Roger Searle wrote:
SuSEbox:/home/roger # cdrecord --scanbus dev=ATAPI
scsidev: 'ATAPI'
devname: 'ATAPI'
scsibus: -2 target: -2 lun: -2
Use of ATA is preferred over ATAPI.
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.8'.
scsibus0:
0,0,0 0) 'AOPEN ' 'CD-RW CRW4048 ' '1.05' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
It's correctly identifying the manufacturer and speed of the device.
Still, I'm getting "Could not enter folder /media/cdrecorder" when
trying to view files on a cd. So my problem isn't really about k3b
itself, the drive won't see any files regardless of method in suse.
I'd swap another drive into the machine if I had one, unfortunately it's
the only one in the house right now. Got to boot to windows in the mean
time to make CDs :-( (would rather not).
Cheers,
Roger
Nick Rout wrote:
On Sun, June 5, 2005 12:06 am, Ross Drummond said:
Running cdrecord --scanbus from the command line may yield some useful
info.
AFAIK that will only get scsi emulated devices. To get IDE devices where
there is no scsi emulation in place (as should be the case with 2.6.x
kernels) you will need:
cdrecord --scanbus dev=ATAPI:
Cheers Ross Drummond
On Sat, 04 Jun 2005 15:56, Roger Searle wrote:
Hi, when trying to use k3b there is no device listed for the reading or
writing device. Trying to refresh or add a device through configure k3b
devices, using either /dev/hdd or /media/cdrecorder just gives
"could not find an additional device at [either of those paths]".
Cheers, Roger
