On Saturday 02 September 2006 09:56, Alan wrote: > ok have gone through setting it up in kppp. > I query the modem and it looks ok I think > with the following responses. > AT1 33600 > AT2 255 > AT3 OK > AT4 V2.000 -V34_ACF_DS1 > AT5 l1151012000 r3000111170000000 > AT6 022 > AT7 RCV288DPFSP Rev 44BC > AT8 000 > > I am sure that is the Dynalink modem that it is seeing > > however when setting to dialling out it says NO DIAL TONE > The Line Cable is definitely plugged into the modem I'd suggest that you take the 'phone wire out of the modem and plug it into an ordinary 'phone to check that the modem is fibbing.
> I have set the Modem commands to be exactly the same as when trying to > connect with the Winmodem should there be something that I should > change in that area?? Make the initialization strings as simple as possible. Start with just ATZ. If that works. All's well. Otherwise take the defaults out of minicom and use those AT commands. Also for the purposes of test, I'd pull the ltmodem card out of the computer, because you could well be having some sort of interrupt clash or some such. -- CS
