Hi Steve Attached is the ppp log output of the last attempt to connect to xtra. This was 5 mins after a successful download of mail etc using the same modem from the xp partition regards Chris
On Tue, 2009-02-24 at 16:42 +1300, Steve Holdoway wrote: > That's an external one, isn't it?? So can you talk to it on /dev/ttyS0 or is > it on ttyS1? > ( try connecting to it with minicom, and typing ATZ - it'll answer OK if it > is, then you'll be sure which device it's on ). > > Other options, like is it waiting for a dialtone ( maybe from the wrong > country? ) before dialling, or can you connect to the clear account that you > know the modem can connect to on other machines?? Hopefully that'll help to > identify which bit is playing up... > > Steve > > On Tue, 24 Feb 2009 16:27:26 +1300 > chris <[email protected]> wrote: > > > Hi Steve, > > Can we start again please? > > the modem is a diamond 56e supra express pro. > > I use it successfully on my other two machines where it connects > > flawlessly to clear. > > However on this machine it will not pass on to Xtra and times out after > > 24 seconds. > > > > Attached is the output from lspic > > > > will be grateful for any help you can give > > Regards Chris Thomas > > > > On Tue, 2009-02-24 at 15:41 +1300, Steve Holdoway wrote: > > > On Tue, 24 Feb 2009 15:33:20 +1300 > > > chris <[email protected]> wrote: > > > > > > > Hi All > > > > I can not connect from my hardy partition to xtra, using either wvdial, > > > > or gnome pp. > > > > This same machine will connect using the the same modem from the windows > > > > partition. > > > > Can anyone please offer any sugestions? > > > > > > > > Regards Chris Thomas > > > > > > > Hi Chris, > > > > > > Knowing what the modem was ( sudo lspci should tell you ) will make > > > support easier (: > > > > > > Cheers, Steve > > > >
--> Ignoring malformed input line: ";Do NOT edit this file by hand!" --> WvDial: Internet dialer version 1.60 --> Cannot set information for serial port. --> Initializing modem. --> Sending: ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATM1L3DT,,087303030,, --> Waiting for carrier. ATM1L3DT,,087303030,, CONNECT 115200 --> Carrier detected. Waiting for prompt. login: --> Looks like a login prompt. --> Sending: vernacee vernacee Password: --> Looks like a password prompt. --> Sending: (password) Login/Network User: --> Looks like a login prompt. --> Sending: vernacee vernacee CLI - Invalid Argument: vernacee This field is a KEYWORD. The possible values are: LOGIN NETWORK PPP Login/Network User: --> Looks like a login prompt. --> Sending: vernacee vernacee CLI - Invalid Argument: vernacee This field is a KEYWORD. The possible values are: LOGIN NETWORK PPP Login/Network User: --> Looks like a login prompt. --> Sending: vernacee vernacee CLI - Invalid Argument: vernacee This field is a KEYWORD. The possible values are: LOGIN NETWORK PPP Login/Network User: --> Don't know what to do! Starting pppd and hoping for the best. --> Starting pppd at Wed Feb 25 10:52:51 2009 --> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied --> --> PAP (Password Authentication Protocol) may be flaky. --> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied --> --> CHAP (Challenge Handshake) may be flaky. --> Pid of pppd: 5485 --> Using interface ppp0 --> Disconnecting at Wed Feb 25 10:53:22 2009 --> The PPP daemon has died: A modem hung up the phone (exit code = 16) --> man pppd explains pppd error codes in more detail. --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
