So thus far you've reinvented the wheel several times without once
stating the specific command that you're using to try & mount the CD or
floppy.  EIther you've got some very unusual hardware, or you're doing
something wrong, because mounting CDs or floppies are incredibly simple:
mount -t msdos /dev/fd0 /mnt/floppy

Look at dmesg to see which devices are getting recognized at bootup. 
Unless you see the floppy & CDROM listed, this is a hardware problem,
and won't be fixed in Linux.

--- Geof Steichen <[EMAIL PROTECTED]> wrote:
> It is a little difficult to cut/paste and e-mail you when I cannot get
> the 
> floppy or cdrom to work so I can get the NIC driver loaded.  I cannot
> telnet, 
> ftp, e-mail, or otherwise communicate using the system in question.
> 
> I get the error message indicating a wrong major or minor device
> number when 
> I try to mount either the floppy or cdrom.  As I showed in my previous
> post, 
> the ls /dev/fd0 -l command results look correct for the floppy.  I
> even tried 
> creating my own /dev/newfd0 using mknod command.  
> 
> When I try to mount /mnt/floppy I get the error message.  I get a
> similar 
> message when I try mount /mnt/cdrom.  Both are in the /etc/fstab and
> are 
> defined correctly (i.e. correct device /dev/fd0  for /mnt/floppy).
> 
> This used to work just fine under COL2.3 but when I moved the drive to
> the 
> new box (AMD K7-900, Asus A7V MB, different network card, different
> video 
> card, etc.) I learned that COL2.3 would not work with the K7-900.  I
> then 
> used the eDesktop2.4 kernel instead.  I can boot and run kde ok but
> cannot 
> mount the floppy or the cdrom.
> 
> I need to find a reference on how this device number stuff works so
> that I 
> can get the floppy working.  I can then get the network card working
> and then 
> get on-line to e-mail any further details.
> 
> 
> 
> 
> 
> 
> 
> On Saturday 04 August 2001 06:41 pm, you wrote:
> > Please give more detail.
> > What does not work?
> > What specific command fails?
> > How was the drive mounted?
> > What is the precise error message? Cut and paste off the screen so
> we can
> > see exactly what has happened.
> > Under what other circumstances is the error occuring?

=====
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Lonni J. Friedman                             [EMAIL PROTECTED]

Linux FAQ & Step-by-step help:    http://netllama.ipfox.com

                                                 .

__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
_______________________________________________
http://linux.nf -- [EMAIL PROTECTED]
Archives, Subscribe, Unsubscribe, Digest, Etc 
->http://linux.nf/mailman/listinfo/linux-users

Reply via email to