Hi Andreas, On Tuesday 08 May 2007, Andreas Volz wrote: > Am Tue, 8 May 2007 11:25:11 +0200 schrieb Laurent Pinchart: > > On Monday 07 May 2007, Andreas Volz wrote: > > > Am Mon, 7 May 2007 15:32:58 +0200 schrieb Laurent Pinchart: > > > > On Monday 07 May 2007, Laurent Pinchart wrote: > > > > > On Monday 07 May 2007, Andreas Volz wrote: > > > > > > Am Sun, 6 May 2007 22:10:25 +0200 schrieb Laurent Pinchart: > > > > > > > > [snip] > > > > > > > > > > > There is no point in testing dv mode, only webcam mode will > > > > > > > work for now. We will try dv mode after being done with > > > > > > > webcam mode. > > > > > > > > Now that webcam mode somehow works, could you test the following > > > > patch with DV mode ? The driver should detect and initialise the > > > > camera, but luvcview will probably not work. Please post the > > > > kernel log (at trace=255) after plugging the device. > > > > > > I applied the patch. I tried it with trace=255 and trace=65535. > > > Here is the result: > > > > > > http://tux-style.de/tmp/dmesg2.txt > > > > My bad, I forgot part of the patch :-/ Could you please try again > > with this one ? Thanks. > > Great work! The DV source works now. I could start lucview and if I > play the video on the camera it shows in the window.
Really ? Haven't you forgotten to switch the camera back to DV mode ? It seems to be in webcam mode. > I don't think it has the same resolution as with the firewire connector. Is > this a limitation? If the camera is indeed in webcam mode, that should explain why :-) > Here is a dmesg. I played the video and connected it again at the end > because there're many messages in the dmesg log. > > http://tux-style.de/tmp/dmesg_dv_works.txt Seems to be in webcam mode. > BTW: I got today my firewire card. The camera has also an firewire > connector. I worked "just out of the box". But I'm still interested to > get all done with USB. I like to have my hardware fully supported. Why > should one buy 100% hardware, but use only 80%? :-) Let's try to get DV mode working then :-) Try to switch your camera to DV mode. It should be properly detected by the driver, but luvcview should not work. Once we get that done, I'll send you a small test application to capture DV data to disk. Laurent Pinchart _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
