Am Sun, 6 May 2007 22:10:25 +0200 schrieb Laurent Pinchart:
e/tmp/lucview.strace
>
> Are you using a USB 1.1 device behind a hub ? Error 38 is ENOSYS, and
On the hub is a big "USB 2.0" sign.
> the only occurrence of that error in the USB stack code seems to be
> related to split isochronous transfers. Can you connect the camera
> directly to the computer if you're using a hub, or turn on
> CONFIG_USB_EHCI_SPLIT_ISO ("Full speed ISO transactions") in your
> kernel ?
I compiled the kernel with the option, but it doesn't work. Hm, I did
only make modules_install because ehci is compiled as module. Do I've
also to install the new kernel?
It works only if I connect the camera direct to the computer.
> There is no point in testing dv mode, only webcam mode will work for
> now. We will try dv mode after being done with webcam mode.
However, it works! I get a video with lucview. The resolution looks
like 320x200. Is this normal? And the control buttons doesn't work. But
I'm very happy to see this fast progress! :-)
regards
Andreas
_______________________________________________
Linux-uvc-devel mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
