Am Tue, 8 May 2007 23:31:33 +0200 schrieb Laurent Pinchart: > Hi Andreas, > > On Tuesday 08 May 2007, Andreas Volz wrote: > > Am Tue, 8 May 2007 11:25:11 +0200 schrieb Laurent Pinchart: > > > On Monday 07 May 2007, Andreas Volz wrote: > > > > Am Mon, 7 May 2007 15:32:58 +0200 schrieb Laurent Pinchart: > > > > > On Monday 07 May 2007, Laurent Pinchart wrote: > > > > > > On Monday 07 May 2007, Andreas Volz wrote: > > > > > > > Am Sun, 6 May 2007 22:10:25 +0200 schrieb Laurent > > > > > > > Pinchart: > > > > > > > > > > [snip] > > > > > > > > > > > > > There is no point in testing dv mode, only webcam mode > > > > > > > > will work for now. We will try dv mode after being done > > > > > > > > with webcam mode. > > > > > > > > > > Now that webcam mode somehow works, could you test the > > > > > following patch with DV mode ? The driver should detect and > > > > > initialise the camera, but luvcview will probably not work. > > > > > Please post the kernel log (at trace=255) after plugging the > > > > > device. > > > > > > > > I applied the patch. I tried it with trace=255 and trace=65535. > > > > Here is the result: > > > > > > > > http://tux-style.de/tmp/dmesg2.txt > > > > > > My bad, I forgot part of the patch :-/ Could you please try again > > > with this one ? Thanks. > > > > Great work! The DV source works now. I could start lucview and if I > > play the video on the camera it shows in the window. > > Really ? Haven't you forgotten to switch the camera back to DV mode ? > It seems to be in webcam mode.
Yes it was in webcam mode. > > I don't think it has the same resolution as with the firewire > > connector. Is this a limitation? > > If the camera is indeed in webcam mode, that should explain why :-) > > > Here is a dmesg. I played the video and connected it again at the > > end because there're many messages in the dmesg log. > > > > http://tux-style.de/tmp/dmesg_dv_works.txt > > Seems to be in webcam mode. > > > BTW: I got today my firewire card. The camera has also an firewire > > connector. I worked "just out of the box". But I'm still interested > > to get all done with USB. I like to have my hardware fully > > supported. Why should one buy 100% hardware, but use only 80%? :-) > > Let's try to get DV mode working then :-) Try to switch your camera > to DV mode. It should be properly detected by the driver, but > luvcview should not work. Once we get that done, I'll send you a > small test application to capture DV data to disk. Here again with dv mode: http://tux-style.de/tmp/dv_mode.txt No video shows as you expected. I tested it again in webcam mode. I could switch at the camera from record to playback setting. Then I could play the yet recorded video and see this though the webcam mode in lucview. So I thought DV mode was working... regards Andreas _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
