Em Wednesday 30 January 2008 08:40:23 Michał Andrzej Woźniak escreveu: > Hi guys > > I am trying to get ALI 5606 to work (ID 0402:5606) on Kubuntu 7.10 (Gutsy > Gibbon). > > The uvcvideo module (from SVN, rev173) compiled nicely and loads OK, but > does *not* print anything in dmesg/syslog upon loading. When I try to run > luvcview, I get: > > luvcview version 0.2.1 > Video driver: x11 > A window manager is available > video /dev/video0 > Unable to set format: 5. > Init v4L2 failed !! exit fatal > > ...regardless, what format and/or other settings I use. On syslog/dmesg I > ony get: > > uvcvideo: Failed to query (130) UVC control 1 (unit 0) : 2 (exp. 26). > > That is *very similar* to what has been described (and marked as solved!) > here: > http://lists.berlios.de/pipermail/linux-uvc-devel/2007-November/002486.html > > I even checked uvc_driver.c and I *do* have the lines as they should look > after the patch has been applied. So, most probably, I am missing something > very obvious. Or am I not?.. > > Any pointers will be apprecieated. Thanks
Strange, because I retested yesterday with a kernel 2.6.24+uvcvideo r173 and it worked on the same webcam (looking at lsusb output you posted nothing relevant differs from the one I tested). > Mike > > P.S. > Attached, outputs of: > - lsusb -v (for the webcam device), > - luvcview > - luvcview -L > - xawtv -hwscan > - v4l-info -- []'s Herton _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
