For STA mode configure legacy basic rates according to info
mac80211 provides to us, as well as follback registers, which
are setup in vendor driver under CONFIG_STA_SUPPORT .
For LB_FBK_CFG1 register use values from vendor driver, which
are different for mt76x0 and mt76x2 .
Signed-off-by: Stanislaw Gruszka <sgrus...@redhat.com>
---
drivers/net/wireless/mediatek/mt76/mt76x02_util.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
index 87ce6a51fb05..2be4b527477f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
@@ -678,6 +678,18 @@ void mt76x02_bss_info_changed(struct ieee80211_hw *hw,
tasklet_enable(&dev->pre_tbtt_tasklet);
}
+ if (changed & BSS_CHANGED_BASIC_RATES &&
+ vif->type == NL80211_IFTYPE_STATION) {
+ mt76_wr(dev, MT_LEGACY_BASIC_RATE, info->basic_rates);
+ mt76_wr(dev, MT_VHT_HT_FBK_CFG0, 0x65432100);
+ mt76_wr(dev, MT_VHT_HT_FBK_CFG1, 0xedcba980);
+ mt76_wr(dev, MT_LG_FBK_CFG0, 0xedcba988);
+ if (is_mt76x2(dev))
+ mt76_wr(dev, MT_LG_FBK_CFG1, 0x87872100);
+ else
+ mt76_wr(dev, MT_LG_FBK_CFG1, 0x00872100);
+ }
+
if (changed & BSS_CHANGED_BEACON_INT) {
mt76_rmw_field(dev, MT_BEACON_TIME_CFG,
MT_BEACON_TIME_CFG_INTVAL,
--
1.9.3
