> Restore behaviour on mt76x0 before commit 1bb04bb4b838 ("mt76: move
> mt76x02_init_device in mt76x02-lib module"). This will allow to use
> wcid 1 for AP when we work in station mode. It's not clear if this
> is needed, but this is how vendor driver assign wcid's in STA mode.
> This should be harmless for mt76x2.
>
> Signed-off-by: Stanislaw Gruszka <[email protected]>
> ---
> drivers/net/wireless/mediatek/mt76/mt76x02_util.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
> b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
> index 2be4b527477f..e624397b3d8b 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
> @@ -113,7 +113,11 @@ void mt76x02_init_device(struct mt76x02_dev *dev)
> ieee80211_hw_set(hw, SUPPORTS_HT_CCK_RATES);
> ieee80211_hw_set(hw, SUPPORTS_REORDERING_BUFFER);
>
> - dev->mt76.global_wcid.idx = 255;
> + /* Reserve WCID 0 for mcast - thanks to this APs WCID will go to
> + * entry no. 1 like it does in the vendor driver.
> + */
> + dev->mt76.wcid_mask[0] |= 1;
> + dev->mt76.global_wcid.idx = 0;
> dev->mt76.global_wcid.hw_key_idx = -1;
> dev->slottime = 9;
>
Does it make any difference in AP mode? What about using 0 instead of
255 for global_wcid.idx?
Regards,
Lorenzo
> --
> 1.9.3
>
