> Use MT_MAC_APC_BSSID0_H_EN bit to indicatate we are
> setting BSSID for STA.
>
> Signed-off-by: Stanislaw Gruszka <[email protected]>
> ---
> drivers/net/wireless/mediatek/mt76/mt76x02_mac.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
> b/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
> index 59b336e34cb5..cfeae5586897 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
> @@ -826,10 +826,16 @@ void mt76x02_mac_work(struct work_struct *work)
>
> void mt76x02_mac_set_bssid(struct mt76x02_dev *dev, u8 idx, const u8 *addr)
> {
> + u32 bssid_h = FIELD_PREP(MT_MAC_APC_BSSID_H_ADDR,
> + get_unaligned_le16(addr + 4));
> + u32 bssid_l = get_unaligned_le32(addr);
> +
> + if (idx > 7)
> + bssid_h |= MT_MAC_APC_BSSID0_H_EN;
This bit is to enable APClient mode and it is valid just for register 0x1094
(MT_MAC_APC_BSSID_{L,h}(0)). Moreover IIRC APClient has been disabled because
it causes a performance degradation.
> +
> idx &= 7;
> - mt76_wr(dev, MT_MAC_APC_BSSID_L(idx), get_unaligned_le32(addr));
> - mt76_rmw_field(dev, MT_MAC_APC_BSSID_H(idx), MT_MAC_APC_BSSID_H_ADDR,
> - get_unaligned_le16(addr + 4));
> + mt76_wr(dev, MT_MAC_APC_BSSID_L(idx), bssid_l);
> + mt76_wr(dev, MT_MAC_APC_BSSID_H(idx), bssid_h);
> }
>
> static int
> --
> 1.9.3
>
