On Fri, Nov 09, 2018 at 12:09:50PM +0100, Lorenzo Bianconi wrote:
> > Use MT_MAC_APC_BSSID0_H_EN bit to indicatate we are
> > setting BSSID for STA.
> >
> > Signed-off-by: Stanislaw Gruszka <sgrus...@redhat.com>
> > ---
> > drivers/net/wireless/mediatek/mt76/mt76x02_mac.c | 12 +++++++++---
> > 1 file changed, 9 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
> > b/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
> > index 59b336e34cb5..cfeae5586897 100644
> > --- a/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
> > +++ b/drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
> > @@ -826,10 +826,16 @@ void mt76x02_mac_work(struct work_struct *work)
> >
> > void mt76x02_mac_set_bssid(struct mt76x02_dev *dev, u8 idx, const u8 *addr)
> > {
> > + u32 bssid_h = FIELD_PREP(MT_MAC_APC_BSSID_H_ADDR,
> > + get_unaligned_le16(addr + 4));
> > + u32 bssid_l = get_unaligned_le32(addr);
> > +
> > + if (idx > 7)
> > + bssid_h |= MT_MAC_APC_BSSID0_H_EN;
>
> This bit is to enable APClient mode and it is valid just for register 0x1094
> (MT_MAC_APC_BSSID_{L,h}(0)). Moreover IIRC APClient has been disabled because
> it causes a performance degradation.
IIRC MT_MAC_APC_BSSID0_H_EN bit enable BSSID8-15 for STA usage, how we then
can program to device those BSSIDs ?
And if this bit is disabled, shouldn't we use MAC_BSSID_DW for setting BSSID
in STA mode ?
Thanks
Stanislaw
