Hi, On Wed, Mar 13, 2013 at 12:07:40AM +0100, Sascha Herrmann wrote: > >> Can anyone else here test this? Any other at86rf230 users? Alex, do you > > >> have any time to give this a go? > > That will be some difficult... I use a at86rf230 which is controlled by > > a microcontoller which has a spi<=>usb bridge. I modified this driver > > myself to get this working with spi<=>usb bridge(not ready for > > mainline yet). > > > > I have a spi at86rf230 on a beaglebone at spi connected, but I can only > > test if breaks hardware or not. I have no equipment to debug it completely. > > I can check if I can communicate from beaglebone(with spi at86rf230 > > connected) to one of my (spi<=>usb bridge) at86rf230. > > Let me know if that is okay for you. > > If you could spare the time, it would be nice to see if it still works > with the patches applied :) >
I will test it this week. > I also have an additional patch, which decreases the time the rf230 > needs to switch from BUSY_TX state to the RX_ON state (by requesting the > state change immediately after the radio entered the TX_BUSY state). > Without this patch switching back to RX_ON state takes to long to > receive Ack frames to outgoing frames from the radio. Maybe this will > fix some other problems too. I will post this patch too, when I get the > time to do some cleanup on it. > Good to hear I get some 'unexcepted state change' msgs. Maybe this will fix this. I can test these patches, too. Alex ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_mar _______________________________________________ Linux-zigbee-devel mailing list Linux-zigbee-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
