Pfff et pourquoi pas rester en vga ? 640x480x8 c'est pas bo ?..
Faut arreter de se faire mal... 800x600 c'est vraiment un truc pour les
écrans 12". Et encore..
Bref, Monsieur Alet, que te dis glxinfo ? Parce que là moi je ne vois
rien dans ton log de X qui indique que le rendu direct a été activé (aka
"Direct Rendering Enabled") et c'est ça qui me gêne le plus. Vérifie
aussi par "lsof |grep /dev/dri" que X y ouvre bien des fichiers. Sinon,
est-ce qu'il n'y a pas des mises à jour de X dispo via apt-get pour ta
debby ?
D
> Jerome Alet a écrit :
> >
> > Bonsoir,
> >
> > je constate de très mauvaises performances graphiques sur deux machines
> > équipée de cartes ATI 3D Rage 128, l'une est un PII 350 et l'autre
> > est un PIII800, et la vitesse du proc ne change rien.
> Bizard ça, si mes souvenir sont bon ce model etait à l'epoque le N°1 des
> test, enfin j'epere que le prob sra vite reglé
> >
> > chaque machine est très confortablement fournie en RAM, et les cartes
> > graphiques disposent de 8 Mo dont une partie seulement est utilisée
> > (1280x1024x24 bits). Les cartes graphiques ne sont pas de modèle identiques
> > (Rage Mobility et All in Wonder) ni du meme age.
> pourquoi autant de def une 800/600 ou 1024*768/16bit ne serait il pas
> suffisant
> LINUXienement
> J B
> >
>
> > les deux machines tournent sous Debian Woody avec XFree 4.1.0-9 et
> > des noyaux 2.4.x (.12 et .16)
> >
> > certains jeux comme lxdoom fonctionnent parfaitement et très rapidement,
> > mais en revanche d'autres comme tuxracer sont hyper-lents, par exemple
> > le curseur souris met plusieurs secondes avant de bouger et les animations
> > sont lamentables.
> >
> > je ne vois pas d'où ça pourrait venir, alors si quelqu'un a une idée, voici
> > ce qui me semble intéressant sur l'une des deux configs :
> >
> > ---- dmesg ----
> > Linux agpgart interface v0.99 (c) Jeff Hartmann
> > agpgart: Maximum main memory to use for agp memory: 233M
> > agpgart: Detected Intel 440BX chipset
> > agpgart: AGP aperture is 8M @ 0xe5000000
> > [drm] AGP 0.99 on Intel 440BX @ 0xe5000000 8MB
> > [drm] Initialized r128 2.1.6 20010405 on minor 0
> > ---- dmesg ----
> >
> > ---- XF86Config-4 ----
> > ...
> > Section "Module"
> > Load "ddc"
> > Load "GLcore"
> > Load "dbe"
> > Load "dri"
> > Load "drm"
> > Load "extmod"
> > Load "glx"
> > Load "pex5"
> > Load "record"
> > Load "xie"
> > Load "bitmap"
> > Load "freetype"
> > Load "speedo"
> > Load "type1"
> > Load "vbe"
> > Load "int10"
> > Load "bt829"
> > EndSection
> >
> > ...
> >
> > Section "Device"
> > Identifier "Generic Video Card"
> > Driver "ati"
> > EndSection
> >
> > ...
> >
> > Section "DRI"
> > Mode 0666
> > EndSection
> > ---- XF86Config-4 ----
> >
> > Le suivant est complet car il ne me parle pas trop...
> >
> > ---- XFree86.0.log ----
> > XFree86 Version 4.1.0.1 / X Window System
> > (protocol Version 11, revision 0, vendor release 6510)
> > Release Date: xx August 2001
> > If the server is older than 6-12 months, or if your card is
> > newer than the above date, look for a newer version before
> > reporting problems. (See http://www.XFree86.Org/FAQ)
> > Build Operating System: Linux 2.4.13 i686 [ELF]
> > Module Loader present
> > (==) Log file: "/var/log/XFree86.0.log", Time: Thu Jan 10 00:03:49 2002
> > (==) Using config file: "/etc/X11/XF86Config-4"
> > Markers: (--) probed, (**) from config file, (==) default setting,
> > (++) from command line, (!!) notice, (II) informational,
> > (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> > (==) ServerLayout "Default Layout"
> > (**) |-->Screen "Default Screen" (0)
> > (**) | |-->Monitor "6091-19i"
> > (**) | |-->Device "Generic Video Card"
> > (**) |-->Input Device "Generic Keyboard"
> > (**) Option "XkbRules" "xfree86"
> > (**) XKB: rules: "xfree86"
> > (**) Option "XkbModel" "pc104"
> > (**) XKB: model: "pc104"
> > (**) Option "XkbLayout" "fr"
> > (**) XKB: layout: "fr"
> > (==) Keyboard: CustomKeycode disabled
> > (**) |-->Input Device "Generic Mouse"
> > (**) FontPath set to
> > "unix/:7110,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi,/usr/lib/X11/fonts/TrueType"
> > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> > (**) ModulePath set to
> > "/usr/X11R6/lib/modules,/usr/X11R6/lib/modules/multimedia"
> > (++) using VT number 7
> >
> > (II) Open APM successful
> > (II) Module ABI versions:
> > XFree86 ANSI C Emulation: 0.1
> > XFree86 Video Driver: 0.4
> > XFree86 XInput driver : 0.2
> > XFree86 Server Extension : 0.1
> > XFree86 Font Renderer : 0.2
> > (II) Loader running on linux
> > (II) LoadModule: "bitmap"
> > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> > (II) Module bitmap: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > Module class: XFree86 Font Renderer
> > ABI class: XFree86 Font Renderer, version 0.2
> > (II) Loading font Bitmap
> > (II) LoadModule: "pcidata"
> > (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> > (II) Module pcidata: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 0.1.0
> > ABI class: XFree86 Video Driver, version 0.4
> > (II) PCI: Probing config type using method 1
> > (II) PCI: Config type is 1
> > (II) PCI: stages = 0x03, oldVal1 = 0x80000058, mode1Res1 = 0x80000000
> > (II) PCI: PCI scan (all values are in hex)
> > (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 02 class 06,00,00 hdr
> > 00
> > (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 02 class 06,04,00 hdr
> > 01
> > (II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr
> > 80
> > (II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr
> > 00
> > (II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr
> > 00
> > (II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr
> > 00
> > (II) PCI: 00:0b:0: chip 1274,1371 card 1274,1371 rev 06 class 04,01,00 hdr
> > 00
> > (II) PCI: 00:0f:0: chip 8086,1229 card 8086,0009 rev 05 class 02,00,00 hdr
> > 00
> > (II) PCI: 01:00:0: chip 1002,4742 card 1002,0062 rev 5c class 03,00,00 hdr
> > 00
> > (II) PCI: End of PCI scan
> > (II) LoadModule: "scanpci"
> > (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> > (II) Module scanpci: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 0.1.0
> > ABI class: XFree86 Video Driver, version 0.4
> > (II) UnloadModule: "scanpci"
> > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> > (II) Host-to-PCI bridge:
> > (II) PCI-to-ISA bridge:
> > (II) PCI-to-PCI bridge:
> > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
> > (II) Bus 0 I/O range:
> > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> > (II) Bus 0 non-prefetchable memory range:
> > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> > (II) Bus 0 prefetchable memory range:
> > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set)
> > (II) Bus 1 I/O range:
> > [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
> > (II) Bus 1 non-prefetchable memory range:
> > [0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B]
> > (II) Bus 1 prefetchable memory range:
> > (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
> > (II) Bus -1 I/O range:
> > (II) Bus -1 non-prefetchable memory range:
> > (II) Bus -1 prefetchable memory range:
> > (--) PCI:*(1:0:0) ATI Mach64 GB rev 92, Mem @ 0xe0000000/24, 0xe2000000/12,
> > I/O @ 0xd000/8
> > (II) Addressable bus resource ranges are
> > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> > (II) OS-reported resource ranges:
> > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > (II) Active PCI resource ranges:
> > [0] -1 0 0xe5800000 - 0xe58fffff (0x100000) MX[B]
> > [1] -1 0 0xe5900000 - 0xe5900fff (0x1000) MX[B]
> > [2] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B]
> > [3] -1 0 0xe2000000 - 0xe2000fff (0x1000) MX[B](B)
> > [4] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
> > [5] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> > [6] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
> > [7] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
> > [8] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> > [9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> > (II) Active PCI resource ranges after removing overlaps:
> > [0] -1 0 0xe5800000 - 0xe58fffff (0x100000) MX[B]
> > [1] -1 0 0xe5900000 - 0xe5900fff (0x1000) MX[B]
> > [2] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B]
> > [3] -1 0 0xe2000000 - 0xe2000fff (0x1000) MX[B](B)
> > [4] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
> > [5] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> > [6] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
> > [7] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
> > [8] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> > [9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> > (II) OS-reported resource ranges after removing overlaps with PCI:
> > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > (II) All system resource ranges:
> > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [5] -1 0 0xe5800000 - 0xe58fffff (0x100000) MX[B]
> > [6] -1 0 0xe5900000 - 0xe5900fff (0x1000) MX[B]
> > [7] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B]
> > [8] -1 0 0xe2000000 - 0xe2000fff (0x1000) MX[B](B)
> > [9] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
> > [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > [12] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> > [13] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
> > [14] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
> > [15] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> > [16] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> > (II) LoadModule: "ddc"
> > (II) Loading /usr/X11R6/lib/modules/libddc.a
> > (II) Module ddc: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > ABI class: XFree86 Video Driver, version 0.4
> > (II) LoadModule: "GLcore"
> > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> > (II) Module GLcore: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > ABI class: XFree86 Server Extension, version 0.1
> > (II) LoadModule: "dbe"
> > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> > (II) Module dbe: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > Module class: XFree86 Server Extension
> > ABI class: XFree86 Server Extension, version 0.1
> > (II) Loading extension DOUBLE-BUFFER
> > (II) LoadModule: "dri"
> > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> > (II) Module dri: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > ABI class: XFree86 Server Extension, version 0.1
> > (II) Loading sub module "drm"
> > (II) LoadModule: "drm"
> > (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> > (II) Module drm: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > ABI class: XFree86 Server Extension, version 0.1
> > (II) Loading extension XFree86-DRI
> > (II) LoadModule: "drm"
> > (II) Reloading /usr/X11R6/lib/modules/linux/libdrm.a
> > (II) LoadModule: "extmod"
> > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> > (II) Module extmod: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > Module class: XFree86 Server Extension
> > ABI class: XFree86 Server Extension, version 0.1
> > (II) Loading extension SHAPE
> > (II) Loading extension MIT-SUNDRY-NONSTANDARD
> > (II) Loading extension BIG-REQUESTS
> > (II) Loading extension SYNC
> > (II) Loading extension MIT-SCREEN-SAVER
> > (II) Loading extension XC-MISC
> > (II) Loading extension XFree86-VidModeExtension
> > (II) Loading extension XFree86-Misc
> > (II) Loading extension XFree86-DGA
> > (II) Loading extension DPMS
> > (II) Loading extension FontCache
> > (II) Loading extension TOG-CUP
> > (II) Loading extension Extended-Visual-Information
> > (II) Loading extension XVideo
> > (II) Loading extension XVideo-MotionCompensation
> > (II) LoadModule: "glx"
> > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> > (II) Module glx: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > ABI class: XFree86 Server Extension, version 0.1
> > (II) Loading sub module "GLcore"
> > (II) LoadModule: "GLcore"
> > (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
> > (II) Loading extension GLX
> > (II) LoadModule: "pex5"
> > (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
> > (II) Module pex5: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > Module class: XFree86 Server Extension
> > ABI class: XFree86 Server Extension, version 0.1
> > (II) Loading extension X3D-PEX
> > (II) LoadModule: "record"
> > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> > (II) Module record: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.13.0
> > Module class: XFree86 Server Extension
> > ABI class: XFree86 Server Extension, version 0.1
> > (II) Loading extension RECORD
> > (II) LoadModule: "xie"
> > (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
> > (II) Module xie: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > Module class: XFree86 Server Extension
> > ABI class: XFree86 Server Extension, version 0.1
> > (II) Loading extension XIE
> > (II) LoadModule: "bitmap"
> > (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
> > (II) Loading font Bitmap
> > (II) LoadModule: "freetype"
> > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> > (II) Module freetype: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.1.9
> > Module class: XFree86 Font Renderer
> > ABI class: XFree86 Font Renderer, version 0.2
> > (II) Loading font FreeType
> > (II) LoadModule: "speedo"
> > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> > (II) Module speedo: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > Module class: XFree86 Font Renderer
> > ABI class: XFree86 Font Renderer, version 0.2
> > (II) Loading font Speedo
> > (II) LoadModule: "type1"
> > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> > (II) Module type1: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > Module class: XFree86 Font Renderer
> > ABI class: XFree86 Font Renderer, version 0.2
> > (II) Loading font Type1
> > (II) Loading font CID
> > (II) LoadModule: "vbe"
> > (II) Loading /usr/X11R6/lib/modules/libvbe.a
> > (II) Module vbe: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > ABI class: XFree86 Video Driver, version 0.4
> > (II) LoadModule: "int10"
> > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> > (II) Module int10: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > ABI class: XFree86 Video Driver, version 0.4
> > (II) LoadModule: "bt829"
> > (II) Loading /usr/X11R6/lib/modules/multimedia/bt829_drv.o
> > (II) Module bt829: vendor="The XFree86 Project"
> > compiled for 4.0.2, module version = 1.0.0
> > ABI class: XFree86 Video Driver, version 0.3
> > (II) LoadModule: "ati"
> > (II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
> > (II) Module ati: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 6.3.6
> > Module class: XFree86 Video Driver
> > ABI class: XFree86 Video Driver, version 0.4
> > (II) LoadModule: "mouse"
> > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> > (II) Module mouse: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > Module class: XFree86 XInput Driver
> > ABI class: XFree86 XInput driver, version 0.2
> > (II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
> > (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
> > ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
> > ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
> > ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI),
> > ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI),
> > ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
> > ATI Rage 128 Mobility ML (AGP)
> > (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
> > ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
> > ATI Radeon VE (AGP)
> > (II) Primary Device is: PCI 01:00:0
> > (II) ATI: Candidate "Device" section "Generic Video Card".
> > (II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 detected.
> > (II) ATI: Shared PCI/AGP Mach64 in slot 1:0:0 assigned to active "Device"
> > section "Generic Video Card".
> > (II) resource ranges after xf86ClaimFixedResources() call:
> > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [5] -1 0 0xe5800000 - 0xe58fffff (0x100000) MX[B]
> > [6] -1 0 0xe5900000 - 0xe5900fff (0x1000) MX[B]
> > [7] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B]
> > [8] -1 0 0xe2000000 - 0xe2000fff (0x1000) MX[B](B)
> > [9] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
> > [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > [12] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> > [13] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
> > [14] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
> > [15] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> > [16] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> > (II) Loading sub module "atimisc"
> > (II) LoadModule: "atimisc"
> > (II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
> > (II) Module atimisc: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 6.3.6
> > Module class: XFree86 Video Driver
> > ABI class: XFree86 Video Driver, version 0.4
> > (II) resource ranges after probing:
> > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [5] -1 0 0xe5800000 - 0xe58fffff (0x100000) MX[B]
> > [6] -1 0 0xe5900000 - 0xe5900fff (0x1000) MX[B]
> > [7] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B]
> > [8] -1 0 0xe2000000 - 0xe2000fff (0x1000) MX[B](B)
> > [9] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
> > [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> > [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> > [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> > [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > [15] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> > [16] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
> > [17] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
> > [18] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> > [19] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> > [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> > [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> > (II) Setting vga for screen 0.
> > (==) ATI(0): Chipset: "ati".
> > (**) ATI(0): Depth 24, (--) framebuffer bpp 32
> > (II) Loading sub module "int10"
> > (II) LoadModule: "int10"
> > (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
> > (II) ATI(0): Primary V_BIOS segment is: 0xc000
> > (II) Loading sub module "ddc"
> > (II) LoadModule: "ddc"
> > (II) Reloading /usr/X11R6/lib/modules/libddc.a
> > (II) Loading sub module "vbe"
> > (II) LoadModule: "vbe"
> > (II) Reloading /usr/X11R6/lib/modules/libvbe.a
> > (II) ATI(0): VESA BIOS detected
> > (II) ATI(0): VESA VBE Version 2.0
> > (II) ATI(0): VESA VBE Total Mem: 8192 kB
> > (II) ATI(0): VESA VBE OEM: ATI MACH64
> > (II) ATI(0): VESA VBE OEM Software Rev: 1.0
> > (II) ATI(0): VESA VBE OEM Vendor: ATI Technologies Inc.
> > (II) ATI(0): VESA VBE OEM Product: MACH64GT
> > (II) ATI(0): VESA VBE OEM Product Rev: 01.00
> > (II) ATI(0): VESA VBE DDC supported
> > (II) ATI(0): VESA VBE DDC Level none
> > (II) ATI(0): VESA VBE DDC transfer in appr. 2 sec.
> > (II) ATI(0): VESA VBE DDC read failed
> > (--) ATI(0): ATI 3D Rage Pro graphics controller detected.
> > (--) ATI(0): Chip type 4742 "GB", version 4, foundry UMC, class 0, revision
> > 0x01.
> > (--) ATI(0): AGP bus interface detected; block I/O base is 0xD000.
> > (--) ATI(0): ATI Mach64 adapter detected.
> > (--) ATI(0): Internal RAMDAC (subtype 1) detected.
> > (==) ATI(0): RGB weight 888
> > (==) ATI(0): Default visual is TrueColor
> > (==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
> > (II) ATI(0): Using Mach64 accelerator CRTC.
> > (II) ATI(0): Storing hardware cursor image at 0xE07FFC00.
> > (II) ATI(0): Using 8 MB linear aperture at 0xE0000000.
> > (!!) ATI(0): Virtual resolutions will be limited to 8191 kB
> > due to linear aperture size and/or placement of hardware cursor image area.
> > (II) ATI(0): Using Block 0 MMIO aperture at 0xE2000400.
> > (II) ATI(0): Using Block 1 MMIO aperture at 0xE2000000.
> > (==) ATI(0): Write-combining range (0xe0000000,0x800000)
> > (II) ATI(0): MMIO write caching enabled.
> > (--) ATI(0): 8192 kB of SGRAM (1:1) detected (using 8191 kB).
> > (WW) ATI(0): Cannot shadow an accelerated frame buffer.
> > (--) ATI(0): Internal programmable clock generator detected.
> > (--) ATI(0): Reference clock 29.500 MHz.
> > (II) ATI(0): 6091-19i: Using hsync range of 63.00-90.00 kHz
> > (II) ATI(0): 6091-19i: Using vrefresh range of 60.00-120.00 Hz
> > (II) ATI(0): Maximum clock: 200.00 MHz
> > (II) ATI(0): Not using mode "1152x864" (hsync out of range)
> > (II) ATI(0): Not using mode "1024x768" (hsync out of range)
> > (II) ATI(0): Not using default mode "640x350" (hsync out of range)
> > (II) ATI(0): Not using default mode "640x400" (hsync out of range)
> > (II) ATI(0): Not using default mode "720x400" (hsync out of range)
> > (II) ATI(0): Not using default mode "640x480" (hsync out of range)
> > (II) ATI(0): Not using default mode "640x480" (hsync out of range)
> > (II) ATI(0): Not using default mode "640x480" (hsync out of range)
> > (II) ATI(0): Not using default mode "640x480" (hsync out of range)
> > (II) ATI(0): Not using default mode "800x600" (hsync out of range)
> > (II) ATI(0): Not using default mode "800x600" (hsync out of range)
> > (II) ATI(0): Not using default mode "800x600" (hsync out of range)
> > (II) ATI(0): Not using default mode "800x600" (hsync out of range)
> > (II) ATI(0): Not using default mode "800x600" (hsync out of range)
> > (II) ATI(0): Not using default mode "1280x960" (hsync out of range)
> > (II) ATI(0): Not using default mode "1600x1200" (bad mode
> > clock/interlace/doublescan)
> > (II) ATI(0): Not using default mode "1600x1200" (bad mode
> > clock/interlace/doublescan)
> > (II) ATI(0): Not using default mode "1792x1344" (insufficient memory for
> > mode)
> > (II) ATI(0): Not using default mode "1792x1344" (insufficient memory for
> > mode)
> > (II) ATI(0): Not using default mode "1856x1392" (insufficient memory for
> > mode)
> > (II) ATI(0): Not using default mode "1856x1392" (insufficient memory for
> > mode)
> > (II) ATI(0): Not using default mode "1920x1440" (insufficient memory for
> > mode)
> > (II) ATI(0): Not using default mode "1920x1440" (insufficient memory for
> > mode)
> > (II) ATI(0): Not using mode "1024x768" (no mode of this name)
> > (II) ATI(0): Not using mode "800x600" (no mode of this name)
> > (--) ATI(0): Virtual size is 1280x1024 (pitch 1280)
> > (**) ATI(0): Mode "1280x1024": 111.5 MHz, 63.4 kHz, 60.0 Hz
> > (II) ATI(0): Modeline "1280x1024" 111.52 1280 1306 1506 1760 1024 1027
> > 1030 1056 (null)
> > (++) ATI(0): DPI set to (100, 100)
> > (II) Loading sub module "xaa"
> > (II) LoadModule: "xaa"
> > (II) Loading /usr/X11R6/lib/modules/libxaa.a
> > (II) Module xaa: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > ABI class: XFree86 Video Driver, version 0.4
> > (II) Loading sub module "ramdac"
> > (II) LoadModule: "ramdac"
> > (II) Loading /usr/X11R6/lib/modules/libramdac.a
> > (II) Module ramdac: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 0.1.0
> > ABI class: XFree86 Video Driver, version 0.4
> > (II) Loading sub module "fb"
> > (II) LoadModule: "fb"
> > (II) Loading /usr/X11R6/lib/modules/libfb.a
> > (II) Module fb: vendor="The XFree86 Project"
> > compiled for 4.1.0.1, module version = 1.0.0
> > ABI class: XFree86 ANSI C Emulation, version 0.1
> > (--) Depth 24 pixmap format is 32 bpp
> > (II) do I need RAC? No, I don't.
> > (II) resource ranges after preInit:
> > [0] 0 0 0xe2000000 - 0xe2000fff (0x1000) MS[B]
> > [1] 0 0 0xe0000000 - 0xe0ffffff (0x1000000) MS[B]
> > [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
> > [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> > [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [7] -1 0 0xe5800000 - 0xe58fffff (0x100000) MX[B]
> > [8] -1 0 0xe5900000 - 0xe5900fff (0x1000) MX[B]
> > [9] -1 0 0xe5000000 - 0xe57fffff (0x800000) MX[B]
> > [10] -1 0 0xe2000000 - 0xe2000fff (0x1000) MX[B](B)
> > [11] -1 0 0xe0000000 - 0xe0ffffff (0x1000000) MX[B](B)
> > [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
> > [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
> > [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
> > [15] 0 0 0x0000d000 - 0x0000d0ff (0x100) IS[B]
> > [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > [18] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
> > [19] -1 0 0x0000e400 - 0x0000e43f (0x40) IX[B]
> > [20] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
> > [21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
> > [22] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
> > [23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> > [24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> > (==) ATI(0): Write-combining range (0xe0000000,0x800000)
> > (II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
> > Screen to screen bit blits
> > Solid filled rectangles
> > 8x8 mono pattern filled rectangles
> > Indirect CPU to Screen color expansion
> > Solid Lines
> > Offscreen Pixmaps
> > Setting up tile and stipple cache:
> > 20 128x128 slots
> > 5 256x256 slots
> > (==) ATI(0): Backing store disabled
> > (==) ATI(0): Silken mouse enabled
> > (II) Initializing built-in extension MIT-SHM
> > (II) Initializing built-in extension XInputExtension
> > (II) Initializing built-in extension XTEST
> > (II) Initializing built-in extension XKEYBOARD
> > (II) Initializing built-in extension LBX
> > (II) Initializing built-in extension XC-APPGROUP
> > (II) Initializing built-in extension SECURITY
> > (II) Initializing built-in extension XINERAMA
> > (II) Initializing built-in extension XFree86-Bigfont
> > (II) Initializing built-in extension RENDER
> > (II) Keyboard "Generic Keyboard" handled by legacy driver
> > (**) Option "Protocol" "PS/2"
> > (**) Generic Mouse: Protocol: "PS/2"
> > (**) Option "CorePointer"
> > (**) Generic Mouse: Core Pointer
> > (**) Option "Device" "/dev/mouse"
> > (==) Generic Mouse: Buttons: 3
> > (**) Option "Emulate3Buttons"
> > (**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
> > (II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
> > ---- XFree86.0.log ----
> >
> > ---- sortie de lsmod ----
> > ...
> > r128 82840 0 (unused)
> > agpgart 27072 1
> > ...
> > ---- sortie de lsmod ----
> >
> > ce qui m'etonne est que le r128 (drm ?) est unused, or ne devrait il
> > pas être utilisé ?
> >
> > devrais-je plutot utiliser le framebuffer ?
> >
> > quelqu'un a une idée ?
> >
> > Merci d'avance !
> >
> > a+
> >
> > Jérôme Alet
>
Linux-Azur : http://www.linux-azur.org
Désinscriptions: http://www.linux-azur.org/liste.php3
**** Pas de message au format HTML, SVP ****
