Hi, ich habe ein 3ware 8506-4LP Raid Controller mit einem Raid-5 am Laufen. Ich höre ab und an fehlergeräusche von einer der Festplatten. Meiner Meinung nach sehe ich aber nichts in Smart, was auf einen Defekt hinweist. Hier die Auszüge den 3 Pladden. Vielleicht seht ihr den Fehler.
smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P120 series Device Model: SAMSUNG SP2504C Serial Number: 301012FP432889 Firmware Version: VT100-59 User Capacity: 250.059.350.016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Sat Jan 10 12:15:35 2009 CET ==> WARNING: May need -F samsung3 enabled; see manual for details. SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (5066) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 84) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 253 253 025 Pre-fail Always - 5824 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 92 5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3032 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 83 187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always - 196608 190 Airflow_Temperature_Cel 0x0022 109 094 000 Old_age Always - 43 194 Temperature_Celsius 0x0022 109 094 000 Old_age Always - 43 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 25285952 196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 2793 - # 2 Extended offline Interrupted (host reset) 70% 2346 - # 3 Extended offline Completed without error 00% 1417 - # 4 Extended offline Completed without error 00% 643 - # 5 Extended offline Completed without error 00% 360 - # 6 Extended offline Completed without error 00% 245 - SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1 SMART Selective self-test log data structure revision number 0 Warning: ATA Specification requires selective self-test log data structure revision number = 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. ______________________________________ smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P120 series Device Model: SAMSUNG SP2504C Serial Number: S09QJ1GL302662 Firmware Version: VT100-33 User Capacity: 250.059.350.016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Sat Jan 10 12:15:51 2009 CET ==> WARNING: May need -F samsung3 enabled; see manual for details. SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (4806) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 80) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 10 3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 6016 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 689 5 Reallocated_Sector_Ct 0x0033 077 077 010 Pre-fail Always - 219 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 17874 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 253 002 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 663 190 Airflow_Temperature_Cel 0x0022 115 082 000 Old_age Always - 41 194 Temperature_Celsius 0x0022 115 082 000 Old_age Always - 41 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 17806828 196 Reallocated_Event_Count 0x0032 077 077 000 Old_age Always - 219 197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17638 - # 2 Extended offline Interrupted (host reset) 20% 17352 - # 3 Extended offline Completed without error 00% 16277 - # 4 Extended offline Completed without error 00% 15985 - # 5 Extended offline Completed without error 00% 15502 - # 6 Extended offline Completed without error 00% 15223 - # 7 Extended offline Completed without error 00% 15108 - # 8 Extended offline Completed without error 00% 14615 - # 9 Extended offline Completed without error 00% 14469 - #10 Extended offline Completed without error 00% 14202 - #11 Extended offline Completed without error 00% 14171 - SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1 SMART Selective self-test log data structure revision number 0 Warning: ATA Specification requires selective self-test log data structure revision number = 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. ______________________________________ smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint P120 series Device Model: SAMSUNG SP2504C Serial Number: S09QJ1GL302666 Firmware Version: VT100-33 User Capacity: 250.059.350.016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Sat Jan 10 12:15:57 2009 CET ==> WARNING: May need -F samsung3 enabled; see manual for details. SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (4836) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 80) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 099 051 Pre-fail Always - 163 3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 5952 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 692 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 1 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 17893 10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 002 000 Old_age Always - 33 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 666 190 Airflow_Temperature_Cel 0x0022 121 082 000 Old_age Always - 39 194 Temperature_Celsius 0x0022 121 082 000 Old_age Always - 39 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 44236889 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 253 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0 202 TA_Increase_Count 0x0032 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 17657 - # 2 Extended offline Interrupted (host reset) 40% 17361 - # 3 Extended offline Completed without error 00% 16457 - # 4 Extended offline Completed without error 00% 16288 - # 5 Extended offline Completed without error 00% 15997 - # 6 Extended offline Completed without error 00% 15514 - # 7 Extended offline Completed without error 00% 15235 - # 8 Extended offline Completed without error 00% 15120 - # 9 Extended offline Completed without error 00% 14627 - #10 Extended offline Completed without error 00% 14481 - #11 Extended offline Completed without error 00% 14210 - #12 Extended offline Completed without error 00% 14182 - SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1 SMART Selective self-test log data structure revision number 0 Warning: ATA Specification requires selective self-test log data structure revision number = 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Hier noch der Auszug aus dem Raid-Controller: Unit UnitType Status %RCmpl %V/I/M Stripe Size(GB) Cache AVrfy ------------------------------------------------------------------------------ u0 RAID-5 OK - - 64K 465.77 ON - Port Status Unit Size Blocks Serial --------------------------------------------------------------- p0 OK u0 232.88 GB 488397168 301012FP432889 p1 NOT-PRESENT - - - - p2 OK u0 232.88 GB 488397168 S09QJ1GL302662 p3 OK u0 232.88 GB 488397168 S09QJ1GL302666 -- Gruß, Konstantin Nebel -- Linux mailing list [email protected] subscribe/unsubscribe: http://lug-owl.de/mailman/listinfo/linux Hinweise zur Nutzung: http://www.lug-owl.de/Mailingliste/hints.epo
