Eric,
If the chip_ops has no .name, then should use
if CONFIG_CHIP_NAME
config chip.h
end
also .c include that chip_ops
#if CONFIG_CHIP_NAME
...chip_ops defininition
#endif
Regards
Such as norththbridge, socket, mainboard(root).
YH
-----Original Message-----
From: YhLu
Sent: Friday, November 05, 2004 10:50 AM
To: [EMAIL PROTECTED]
Cc: Ronald G. Minnich; Li-Ta Lo; LinuxBIOS
Subject: RE: Removing device driver code in mainboard.c for Tyan boards?
What does "config chip.h" in Config.lb use for?
It seems it is not necessary?
Regards
YH
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Sent: Friday, November 05, 2004 10:31 AM
To: YhLu
Cc: Ronald G. Minnich; Li-Ta Lo; LinuxBIOS
Subject: Re: Removing device driver code in mainboard.c for Tyan boards?
YhLu <[EMAIL PROTECTED]> writes:
> Forget about that.
Ok.
> Why separate root_complex from amdk8/northbridge.c to
> root_complex/root_complex.c
I haven't because the code is to intertwined in northbridge.c and
it would be likely be a maintenance problem to do so.
Eric
_______________________________________________
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
_______________________________________________
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
