Boot log and your MB Config.lb?
YH ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Pub Sent: Wednesday, February 28, 2007 9:07 AM To: [email protected] Subject: [LinuxBIOS] LinuxBIOS and VMWare Hi There, Has anyone had any success with VMWare. I have partially implemented the PC87360 SIO chip which has give me serial and I can boot LinuxBIOS up to the elf payload stage. I'm trying to get the VMWare VGA to work at no avail. Has anyone else has success with this. I have added default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 to the Optionslb file and adjusted the size of the ROM image by -32KB (sizeof VGA BIOS for VMWare) and also added device pci f.0 on # VGA controller chip drivers/pci/onboard device pci f.0 on end register "rom_address" = "0xfff80000" end end to the Config.lb. When I start VMWare with this image though it does nothing but sit there with no VGA. I have even enabled serial logging back on using CONFIG_CONSOLE_SERIAL8250 but still continue to use CONFIG_PCI_ROM_RUN but nothing then even gets written to the serial port. When does the VGA BIOS rom get called, at what stage? Regards, Joe
-- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
