Hi Uwe, On Wed, Jun 06, Uwe Hermann wrote:
> On Mon, Jun 04, 2007 at 11:42:44PM +0200, Dieter Bloms wrote:
> > /* Setup the console */
> > w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
> > uart_init();
> > console_init();
> > print_err("Hello\n");
>
> Are you sure your hardware setup is working otherwise? Can you leave the
> null-modem cable attached as it is right now, but boot a normal Linux
> system on both ends of the cable? Then run minicom, 115200 BAUD on both
> sides, and test whether the trasmission itself works?
it works, because my system is connected via wlan and sometimes the
driver hangs up.
Then I log in via serial cable and reload the driver.
> Do you use real serial ports or some USB-to-serial thingy? I had some
> problems with these devices in the past, a real serial port might be
> more reliable...
yes there are real serial drivers on both sides.
--
Gruß
Dieter
--
I do not get viruses because I do not use MS software.
If you use Outlook then please do not put my email address in your
address-book so that WHEN you get a virus it won't use my address in the
From field.
signature.asc
Description: Digital signature
-- linuxbios mailing list [email protected] http://www.linuxbios.org/mailman/listinfo/linuxbios
