> Mikael Halvarsson wrote: > > >>surprising! > >> > >>OK, is this DoC or FLASH? Also, did you try putting it in different > >>slots? > >> > > > >Flash, > > > >If it's in PCI slot #1 or #3, then no irq is assigned to the board (IRQ0 in > >dmesg). But when I put it in PCI Slot #2, an irq is assigned but the board > >does not work (getting "NETDEV WATCHDOG: eth0: transmit timed out" in dmesg) > > > >I've also tested two other ethernet cards, an "Intel eepro100" and a > >"RealTek" based card, but the same thing happens to these two also. > > > >Does it have any difference that the "orginal" MS7308E (SiS630) has two PCI > >slots and the MS7308ET (SiS630ET) has three? > > > Definitely. Adding an extra PCI slot should affect PIRQ table a lot. > > Did you try getpir yet ?? > > Ollie
getpir fixed it, the card has now a irq and works just fine =) Thanks, -mikael
