Thanks for all the help and ideas. YhLu, you are good. 040 works, but 004 doesn't. 040 has LPC interface, 004 has FWH interface.
thanks beneo ----- Original Message ----- From: "Stefan Reinauer" <[EMAIL PROTECTED]> To: "beneo" <[EMAIL PROTECTED]> Cc: <[email protected]>; "YhLu" <[EMAIL PROTECTED]> Sent: Thursday, May 12, 2005 1:02 PM Subject: Re: [LinuxBIOS] flash issue with AMD Ref board > * beneo <[EMAIL PROTECTED]> [050512 19:56]: > > I spent sometime to check 8111 southbridge, but I couldn't find anything > > there. > > It would not be part of the southbridge itself, but for example > connected to the smbus. > It might also very well be that AMIBIOS sets the switch correctly, which > is why flashing works in Linux with AB. but not with LB. > > > Is that possible some setting in the Opteron that prevent write access to > > the EEPROM address be passed down southbridge? I'm not farmilar with the > > Opteron NB and CPU, if you guys can give me some pointers, that would help > > me a lot. > > Not in the Opteron/NB itself, but it could very well be something > mainboard specifi, but it could very well be something mainboard > specific.. > > Stefan > > > _______________________________________________ > LinuxBIOS mailing list > [email protected] > http://www.openbios.org/mailman/listinfo/linuxbios _______________________________________________ LinuxBIOS mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
