Create back and forward links between RIO devices. These links are intended for
use by error management and hot-plug extensions.
Signed-off-by: Alexandre Bounine <alexandre.boun...@idt.com>
Reviewed-by: Thomas Moll <thomas.m...@sysgo.com>
Cc: Matt Porter <mpor...@kernel.crashing.org>
Cc: Li Yang <le...@freescale.com>
Cc: Kumar Gala <ga...@kernel.crashing.org>
---
drivers/rapidio/rio-scan.c | 55 +++++++++++++++++--------------------------
include/linux/rio.h | 6 ++++
2 files changed, 28 insertions(+), 33 deletions(-)
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index efe3519..5dc33d1 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -442,7 +442,10 @@ static struct rio_dev __devinit *rio_setup_device(struct
rio_net *net,
if (rio_is_switch(rdev)) {
rio_mport_read_config_32(port, destid, hopcount,
RIO_SWP_INFO_CAR, &swpinfo);
- rswitch = kzalloc(sizeof(struct rio_switch), GFP_KERNEL);
+ rswitch = kzalloc(sizeof(*rswitch) +
+ RIO_GET_TOTAL_PORTS(swpinfo) *
+ sizeof(rswitch->nextdev[0]),
+ GFP_KERNEL);
if (!rswitch)
goto cleanup;
rswitch->switchid = next_switchid;
@@ -450,6 +453,7 @@ static struct rio_dev __devinit *rio_setup_device(struct
rio_net *net,
rswitch->destid = destid;
rswitch->port_ok = 0;
rswitch->inport = (u8)(swpinfo & RIO_SWP_INFO_PORT_NUM_MASK);
+ rswitch->nports = (u8)RIO_GET_TOTAL_PORTS(swpinfo);
rswitch->route_table = kzalloc(sizeof(u8)*
RIO_MAX_ROUTE_ENTRIES(port->sys_size),
GFP_KERNEL);
@@ -721,25 +725,6 @@ static u16 rio_get_host_deviceid_lock(struct rio_mport
*port, u8 hopcount)
}
/**
- * rio_get_swpinfo_tports- Gets total number of ports on the switch
- * @mport: Master port to send transaction
- * @destid: Destination ID associated with the switch
- * @hopcount: Number of hops to the device
- *
- * Returns total numbers of ports implemented by the switch device.
- */
-static u8 rio_get_swpinfo_tports(struct rio_mport *mport, u16 destid,
- u8 hopcount)
-{
- u32 result;
-
- rio_mport_read_config_32(mport, destid, hopcount, RIO_SWP_INFO_CAR,
- &result);
-
- return RIO_GET_TOTAL_PORTS(result);
-}
-
-/**
* rio_net_add_mport- Add a master port to a RIO network
* @net: RIO network
* @port: Master port to add
@@ -759,15 +744,16 @@ static void rio_net_add_mport(struct rio_net *net, struct
rio_mport *port)
* @net: RIO network being enumerated
* @port: Master port to send transactions
* @hopcount: Number of hops into the network
+ * @prev: Previous RIO device connected to the enumerated one
+ * @prev_port: Port on previous RIO device
*
* Recursively enumerates a RIO network. Transactions are sent via the
* master port passed in @port.
*/
static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
- u8 hopcount)
+ u8 hopcount, struct rio_dev *prev, int prev_port)
{
int port_num;
- int num_ports;
int cur_destid;
int sw_destid;
int sw_inport;
@@ -812,6 +798,9 @@ static int __devinit rio_enum_peer(struct rio_net *net,
struct rio_mport *port,
if (rdev) {
/* Add device to the global and bus/net specific list. */
list_add_tail(&rdev->net_list, &net->devices);
+ rdev->prev = prev;
+ if (prev && rio_is_switch(prev))
+ prev->rswitch->nextdev[prev_port] = rdev;
} else
return -1;
@@ -830,14 +819,13 @@ static int __devinit rio_enum_peer(struct rio_net *net,
struct rio_mport *port,
rdev->rswitch->route_table[destid] = sw_inport;
}
- num_ports =
- rio_get_swpinfo_tports(port, RIO_ANY_DESTID(port->sys_size),
- hopcount);
pr_debug(
"RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
- rio_name(rdev), rdev->vid, rdev->did, num_ports);
+ rio_name(rdev), rdev->vid, rdev->did,
+ rdev->rswitch->nports);
sw_destid = next_destid;
- for (port_num = 0; port_num < num_ports; port_num++) {
+ for (port_num = 0;
+ port_num < rdev->rswitch->nports; port_num++) {
/*Enable Input Output Port (transmitter reviever)*/
rio_enable_rx_tx_port(port, 0,
RIO_ANY_DESTID(port->sys_size),
@@ -862,7 +850,8 @@ static int __devinit rio_enum_peer(struct rio_net *net,
struct rio_mport *port,
RIO_ANY_DESTID(port->sys_size),
port_num, 0);
- if (rio_enum_peer(net, port, hopcount + 1) < 0)
+ if (rio_enum_peer(net, port, hopcount + 1,
+ rdev, port_num) < 0)
return -1;
/* Update routing tables */
@@ -949,7 +938,6 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port,
u16 destid,
u8 hopcount)
{
u8 port_num, route_port;
- int num_ports;
struct rio_dev *rdev;
u16 ndestid;
@@ -966,11 +954,12 @@ rio_disc_peer(struct rio_net *net, struct rio_mport
*port, u16 destid,
/* Associated destid is how we accessed this switch */
rdev->rswitch->destid = destid;
- num_ports = rio_get_swpinfo_tports(port, destid, hopcount);
pr_debug(
"RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
- rio_name(rdev), rdev->vid, rdev->did, num_ports);
- for (port_num = 0; port_num < num_ports; port_num++) {
+ rio_name(rdev), rdev->vid, rdev->did,
+ rdev->rswitch->nports);
+ for (port_num = 0;
+ port_num < rdev->rswitch->nports; port_num++) {
if (rdev->rswitch->inport == port_num)
continue;
@@ -1163,7 +1152,7 @@ int __devinit rio_enum_mport(struct rio_mport *mport)
/* Enable Input Output Port (transmitter reviever) */
rio_enable_rx_tx_port(mport, 1, 0, 0, 0);
- if (rio_enum_peer(net, mport, 0) < 0) {
+ if (rio_enum_peer(net, mport, 0, NULL, 0) < 0) {
/* A higher priority host won enumeration, bail. */
printk(KERN_INFO
"RIO: master port %d device has lost enumeration
to a remote host\n",
diff --git a/include/linux/rio.h b/include/linux/rio.h
index 718075a..754895c 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -98,6 +98,7 @@ union rio_pw_msg;
* @riores: RIO resources this device owns
* @pwcback: port-write callback function for this device
* @destid: Network destination ID
+ * @prev: Previous RIO device connected to the current one
*/
struct rio_dev {
struct list_head global_list; /* node in list of all RIO devices */
@@ -123,6 +124,7 @@ struct rio_dev {
struct resource riores[RIO_MAX_DEV_RESOURCES];
int (*pwcback) (struct rio_dev *rdev, union rio_pw_msg *msg, int step);
u16 destid;
+ struct rio_dev *prev;
};
#define rio_dev_g(n) list_entry(n, struct rio_dev, global_list)
@@ -221,6 +223,7 @@ struct rio_net {
* @hopcount: Hopcount to this switch
* @destid: Associated destid in the path
* @inport: Switch ingress port number
+ * @nports: Total number of ports in the switch
* @route_table: Copy of switch routing table
* @port_ok: Status of each port (one bit per port) - OK=1 or UNINIT=0
* @add_entry: Callback for switch-specific route add function
@@ -230,6 +233,7 @@ struct rio_net {
* @get_domain: Callback for switch-specific domain get function
* @em_init: Callback for switch-specific error management initialization
function
* @em_handle: Callback for switch-specific error management handler function
+ * @nextdev: Array of per-port pointers to the next attached device
*/
struct rio_switch {
struct list_head node;
@@ -237,6 +241,7 @@ struct rio_switch {
u16 hopcount;
u16 destid;
u8 inport;
+ u8 nports;
u8 *route_table;
u32 port_ok;
int (*add_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
@@ -251,6 +256,7 @@ struct rio_switch {
u8 *sw_domain);
int (*em_init) (struct rio_dev *dev);
int (*em_handle) (struct rio_dev *dev, u8 swport);
+ struct rio_dev *nextdev[0];
};
/* Low-level architecture-dependent routines */
--
1.7.0.5
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
