Kumar, Thanks for u'r reply. I tried it but it does not seem to work.
Here's my uboot info... U-Boot 1.1.1 (Oct 29 2004 - 18:28:57) MPC8272 Reset Status: External Soft, External Hard MPC8272 Clock Configuration - Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq 25-75 , Core Freq 100-300 - dfbrg 1, corecnf 0x0a, busdf 3, cpmdf 1, plldf 0, pllmf 3 - vco_out 400000000, scc_clk 100000000, brg_clk 25000000 - cpu_clk 400000000, cpm_clk 200000000, bus_clk 100000000 - pci_clk 66666666 CPU: MPC8272 (HiP7 Rev 13, Mask 0.0 0K50M) at 400 MHz Board: Motorola MPC8272ADS DRAM: 64 MB Now running in RAM - U-Boot at: 03fc4000 FLASH: 8 MB In: serial Out: serial Err: serial Net: FCC1 ETHERNET Hit any key to stop autoboot: 0 => setenv bootargs console=ttyCPM0,115200 root=/dev/ram => bootm fe600000 ## Booting image at fe600000 ... Image Name: 2.6.12 for 8272 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 875845 Bytes = 855.3 kB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Hang here... Anymore thots and pointers ? Thanks! ashutosh On 7/14/05, Kumar Gala <kumar.gala at freescale.com> wrote: > You may need to check the bootargs to insure that console=ttyCPM0 > > - kumar > > On Jul 14, 2005, at 1:55 AM, SIP COP 009 wrote: > > > Hello, > > > > We have a MPC8272 Eval Board which came with Linux 2.4 and U-boot. We > > wanted to move to 2.6. I downloaded the latest 2.6.12 sources and > > compiled the sources for this platform. The kernel is built, have run > > the mkimage tool, but the kernel wont boot. It just hangs after > > decompressing the image. > > > > Any ideas ? Anything different that needs to be done for 2.6 ? Or any > > known issues ? > > > > Thanks! > > ashutosh > > _______________________________________________ > > Linuxppc-embedded mailing list > > Linuxppc-embedded at ozlabs.org > > https://ozlabs.org/mailman/listinfo/linuxppc-embedded > > > >
