> => setenv bootargs console=ttyCPM0,115200 root=/dev/ram > => bootm fe600000 > ## Booting image at fe600000 ... > Image Name: 2.6.12 for 8272 > Image Type: PowerPC Linux Kernel Image (gzip compressed) > Data Size: 875845 Bytes = 855.3 kB > Load Address: 00000000 > Entry Point: 00000000 > Verifying Checksum ... OK > Uncompressing Kernel Image ... OK >
Can you provide your kernel configuration information regarding the serial ports. Which serial port is your console port? Check the following configuration options: CONFIG_SERIAL_CONSOLE CONFIG_SCC_CONSOLE CONFIG_SERIAL_CORE CONFIG_SERIAL_CORE_CONSOLE Another observation is that you are trying to boot with a RAM disk but you have not provided the RAM disk address to the bootm command. This is not your current problem since you don't get that far. - Allen
