linuxppc-embedded  

Messages by Thread

• • emac driver broken in 2.6.12.2 ? Josh Boyer
  • emac driver broken in 2.6.12.2 ? Peter Fercher
  • emac driver broken in 2.6.12.2 ? Josh Boyer
  • emac driver broken in 2.6.12.2 ? Matt Porter
  • emac driver broken in 2.6.12.2 ? Stefan Roese
  • AW: emac driver broken in 2.6.12.2 ? David Grab
• Which way to store log in flash on mpc8xx? David Jander
  • Which way to store log in flash on mpc8xx? Frank
  • Which way to store log in flash on mpc8xx? Wolfgang Denk
  • Which way to store log in flash on mpc8xx? David Jander
  • Which way to store log in flash on mpc8xx? Wolfgang Denk
  • Which way to store log in flash on mpc8xx? David Jander
  • Which way to store log in flash on mpc8xx? Wolfgang Denk
  • Which way to store log in flash on mpc8xx? David Ho
  • Which way to store log in flash on mpc8xx? David Jander
  • Which way to store log in flash on mpc8xx? Shawn Jin
  • Which way to store log in flash on mpc8xx? Jörn Engel
  • Which way to store log in flash on mpc8xx? Wolfgang Denk
  • Which way to store log in flash on mpc8xx? Eli Brin
  • Which way to store log in flash on mpc8xx? Fillod Stephane
• kernel 2.6.12.2, octobus ppc405EP: GUNZIP ERROR - must RESET board to recover Peter Fercher
  • kernel 2.6.12.2, octobus ppc405EP: GUNZIP ERROR - must RESET board to recover Wolfgang Denk
• ATI Radeon M6-C16h for PPC 440GX Roberto Pavon Sierra
  • ATI Radeon M6-C16H for PPC 440GX Bashier Machmur
• Cartoes UOL [EMAIL PROTECTED]
• squashfs on ppc Tolunay Orkun
  • squashfs on ppc Eugene Surovegin
  • squashfs on ppc Tolunay Orkun
• bseip config doesn't build Kumar Gala
  • bseip config doesn't build Dan Malek
  • bseip config doesn't build Kumar Gala
• I2S MPC5200 Arnaud Carer
  • I2S MPC5200 Bob Peterson
• [PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC I devices Vitaly Bordug
• OpenSSL 0.9.8 compile error! Ricardo Fialho Tafas Junior
  • OpenSSL 0.9.8 compile error! Eli Brin
  • OpenSSL 0.9.8 compile error! Ricardo Fialho Tafas Junior
• Java on PowerPC Rita Carvalho
  • Java on PowerPC Marius Groeger
  • Java on PowerPC Robert Swindells
• HELLO colaristide2
  • HELLO jonaris0
  • HELLO jonaris0
  • Hello Henry Quinn
  • Hello guru bala
• A mtd timeout issue on ppc JohnsonCheng
• How to dump D-cache Shawn Jin
• Getting Perl on Embedded Linux PowerPC Russell McGuire
  • Getting Perl on Embedded Linux PowerPC Wolfgang Denk
  • Getting Perl on Embedded Linux PowerPC Clemens Koller
• How to use kerberos in ELDK JohnsonCheng
  • How to use kerberos in ELDK Wolfgang Denk
  • How to use kerberos in ELDK JohnsonCheng
  • How to use kerberos in ELDK Wolfgang Denk
  • How to use kerberos in ELDK JohnsonCheng
  • How to use kerberos in ELDK Wolfgang Denk
  • How to use kerberos in ELDK JohnsonCheng
• A question about the /dev/ide FCG WANG Baohua
  • A question about the /dev/ide Clemens Koller
• A question regarding the Marvel 64360 and a MPC7447A Adrian B. Weissman
• MPC5200 : BAPI versions & processor revision Frederic Janot
• How to support LFS on ppc JohnsonCheng
  • How to support LFS on ppc Fillod Stephane
  • How to support LFS on ppc JohnsonCheng
• How to access linux symbols from dynamically loaded .so (dlopen) Nishant Galange
• 1161 host 汪 秀平
• How to modify MTD driver for MX29LV320ABTC-90? 徐小威的EMAIL
  • How to modify MTD driver for MX29LV320ABTC-90? Debora Liu
• Account Review Team PayPal
• Interrupt mapping for MPC8541 Bizhan Gholikhamseh (bgholikh)
• __switch_to test-and-branch ALTIVEC specific? Marcelo Tosatti
  • __switch_to test-and-branch ALTIVEC specific? Kumar Gala
  • __switch_to test-and-branch ALTIVEC specific? Marcelo Tosatti
  • __switch_to test-and-branch ALTIVEC specific? Kumar Gala
  • __switch_to test-and-branch ALTIVEC specific? Benjamin Herrenschmidt
  • __switch_to test-and-branch ALTIVEC specific? Segher Boessenkool
  • __switch_to test-and-branch ALTIVEC specific? Benjamin Herrenschmidt
  • -dev and -embedded cross-posting Eugene Surovegin
  • __switch_to test-and-branch ALTIVEC specific? Paul Mackerras
• [PATCH] ppc32 8xx: use io accessor macros instead of direct memory reference Marcelo Tosatti
• Regarding booting the PPC board - issue with Ramdisk vinay hegde
• USB root filesytem using a 2.6 kernel? Jeff Stevens
  • USB root filesytem using a 2.6 kernel? Peter Korsgaard
• gdb hangs on Linux 2.6.11 on 8xx Chris
  • gdb hangs on Linux 2.6.11 on 8xx Aristeu Sergio Rozanski Filho
  • gdb hangs on Linux 2.6.11 on 8xx Chris
  • gdb hangs on Linux 2.6.11 on 8xx Marcelo Tosatti
  • gdb hangs on Linux 2.6.11 on 8xx Aristeu Sergio Rozanski Filho
  • gdb hangs on Linux 2.6.11 on 8xx Chris
  • gdb hangs on Linux 2.6.11 on 8xx Marcelo Tosatti
  • gdb hangs on Linux 2.6.11 on 8xx Aristeu Sergio Rozanski Filho
  • gdb hangs on Linux 2.6.11 on 8xx Marcelo Tosatti
  • gdb hangs on Linux 2.6.11 on 8xx Aristeu Sergio Rozanski Filho
  • gdb hangs on Linux 2.6.11 on 8xx Marcelo Tosatti
  • gdb hangs on Linux 2.6.11 on 8xx Aristeu Sergio Rozanski Filho
• Help on 8260 board [EMAIL PROTECTED]
  • Help on 8260 board Alex Zeffertt
  • Help on 8260 board Alex Zeffertt
  • Help on 8260 board Tore Martin Hagen
• Re Re: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads Rune Torgersen
  • New message about: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads KylongMu
  • New message about: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads Clemens Koller
• Re Re: "Lost interrupt" with promise20268 PCI-IDE chard on mpc8540_ads KylongMu
• Why IRQ8 infects the timer on mpc8541? chao yu
• "Lost interrupt" with promise20268 PCI-IDE chard on mpc8540_ads platform! KylongMu
  • "Lost interrupt" with promise20268 PCI-IDE chard on mpc8540_ads platform! Clemens Koller
• Building Linux kernel with GCC 3.4.3 fails IGOR LURI
• [PATCH 2/2] Add support for MEMEC 2VP30-FF1152 eval board with simple FPGA design Grant Likely
  • [PATCH 2/2] Add support for MEMEC 2VP30-FF1152 eval board with simple FPGA design Peter Korsgaard
  • [PATCH 2/2] Add support for MEMEC 2VP30-FF1152 eval board with simple FPGA design Grant Likely
  • [PATCH 2/2] Add support for MEMEC 2VP30-FF1152 eval board with simple FPGA design Peter Korsgaard
• [PATCH 1/2] Move Virtex-II Pro / ML300 port over to the platform bus. Grant Likely
  • [PATCH 1/2] Move Virtex-II Pro / ML300 port over to the platform bus. Peter Korsgaard
  • [PATCH 1/2] Move Virtex-II Pro / ML300 port over to the platform bus. Grant Likely
  • [PATCH 1/2] Move Virtex-II Pro / ML300 port over to the platform bus. Grant Likely
  • [PATCH 1/2] Move Virtex-II Pro / ML300 port over to the platform bus. Peter Korsgaard
• [PATCH 0/2] RFC: Port Virtex-II Pro code to use the platform bus Grant Likely
  • [PATCH 0/2] RFC: Port Virtex-II Pro code to use the platform bus Grant Likely
• Marvell MV64360 interrupt question Walter L. Wimer III
  • Marvell MV64360 interrupt question Walter L. Wimer III
  • Marvell MV64360 interrupt question Brian Waite
  • Marvell MV64360 interrupt question Dale Farnsworth
  • Marvell MV64360 interrupt question Walter L. Wimer III
  • Marvell MV64360 interrupt question Walter L. Wimer III
  • Marvell MV64360 interrupt question Dale Farnsworth
  • Marvell MV64360 interrupt question Mark A. Greer
  • Marvell MV64360 interrupt question Brian Waite
• Can the mpc8270 provide the direct IDE interface? FCG WANG Baohua
• cpu features testing 32 vs 64 bit Becky Bruce
  • cpu features testing 32 vs 64 bit Pantelis Antoniou
  • cpu features testing 32 vs 64 bit Kumar Gala
  • cpu features testing 32 vs 64 bit Dan Malek
  • cpu features testing 32 vs 64 bit Kumar Gala
  • cpu features testing 32 vs 64 bit Dan Malek
  • cpu features testing 32 vs 64 bit Arnd Bergmann
  • cpu features testing 32 vs 64 bit David Gibson
  • [PATCH] powerpc: merge include/asm/cputable.h Arnd Bergmann
  • [PATCH] powerpc: merge include/asm/cputable.h Kumar Gala
  • [PATCH] powerpc: merge include/asm/cputable.h Arnd Bergmann
  • [PATCH] powerpc: merge include/asm/cputable.h Kumar Gala
  • [PATCH] powerpc: merge include/asm/cputable.h Arnd Bergmann
  • [PATCH] powerpc: merge include/asm/cputable.h Kumar Gala
  • [PATCH] powerpc: merge include/asm/cputable.h Arnd Bergmann
  • [PATCH] powerpc: merge include/asm/cputable.h Kumar Gala
  • [PATCH] powerpc: merge include/asm/cputable.h Arnd Bergmann
  • cpu features testing 32 vs 64 bit Benjamin Herrenschmidt
• [PATCH 2.6.13] ppc32: Kill PVR_440* defines Tom Rini
• [PATCH 2.6.13] ppc32: In the boot code, don't rely on BASE_BAUD directly Tom Rini
• [PATCH 2.6.13] ppc32: Correct an instruction in the boot code Tom Rini
• [PATCH] ppc32: Fix head_4xx.S compile error Kumar Gala
• Can't run 8M ramdisk at 2.4.20 linux 徐小威的EMAIL
  • Can't run 8M ramdisk at 2.4.20 linux Alex Zeffertt
• BDI2000 with PPC405EP Albert David
  • BDI2000 with PPC405EP Eugene Surovegin
  • BDI2000 with PPC405EP Albert David
• [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Marcelo Tosatti
  • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Benjamin Herrenschmidt
  • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Dan Malek
  • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Benjamin Herrenschmidt
  • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Marcelo Tosatti
  • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Paul Mackerras
  • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Dan Malek
  • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Marcelo Tosatti
  • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Marcelo Tosatti
  • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Benjamin Herrenschmidt
• MPC5200 Linux Init Problem Frank Beesley
  • MPC5200 Linux Init Problem Jeff Angielski
  • MPC5200 Linux Init Problem Bob Peterson
  • MPC5200 Linux Init Problem Frank Beesley
• newbie question : how to register for a new interrupt Nuguru Susheel
  • newbie question : how to register for a new interrupt Arthur Othieno
• ads8272 SEC problem on 2.4.18 Markus
  • ads8272 SEC problem on 2.4.18 Vikas Aggarwal
  • ads8272 SEC problem on 2.4.18 Kim Phillips
• lost "Using multi-level CPM interrupts" option 徐小威的EMAIL
• How can I compile the module into kernel zhonglei
  • How can I compile the module into kernel Nuguru Susheel
  • How can I compile the module into kernel [EMAIL PROTECTED]
• Xilinx SystemACE driver for 2.6 Grant Likely
  • Xilinx SystemACE driver for 2.6 Jeff Angielski
  • Xilinx SystemACE driver for 2.6 G.Muruganandam
  • Xilinx SystemACE driver for 2.6 Ameet Patil
  • Xilinx SystemACE driver for 2.6 sudheer
  • Xilinx SystemACE driver for 2.6 Ameet Patil
  • Xilinx SystemACE driver for 2.6 Ming Liu
  • Xilinx SystemACE driver for 2.6 Ameet Patil
  • Xilinx SystemACE driver for 2.6 Ming Liu
  • Xilinx SystemACE driver for 2.6 Andrei Konovalov
  • Xilinx SystemACE driver for 2.6 David H. Lynch Jr.
  • Xilinx SystemACE driver for 2.6 Ameet Patil
  • Xilinx SystemACE driver for 2.6 Grant Likely
  • Xilinx SystemACE driver for 2.6 Ming Liu
  • Xilinx SystemACE driver for 2.6 Ameet Patil
  • Xilinx BSP for linux 2.6 Ming Liu
  • Xilinx BSP for linux 2.6 Ameet Patil
  • Xilinx SystemACE driver for 2.6 Ameet Patil
• Regarding the PPC board bringup with Linux 2.6 kernel vinay hegde
  • Regarding the PPC board bringup with Linux 2.6 kernel Wolfgang Denk
  • Regarding the PPC board bringup with Linux 2.6 kernel Clemens Koller
  • Regarding the PPC board bringup with Linux 2.6 kernel Robert P. J. Day

• Earlier messages
• Later messages