> On 5 Jul 2019, at 11:01, Armin HAMAR <armin.ha...@sprecher-automation.com> > wrote: > > I did test both first the intel card to another one which needed only minimal > adjustments to get it down where i wanted it to be. > Sadly i currently have no way to get a second FEC.
Given you have the i210 working as you expect you could try doing this: > However, I would try to address the delay issue first and then if still > necessary use the delayAsymmetry configuration parameter. > I would connect two i210 point to point (directly), run linuxptp and change > the egress/ingress compensation values until: > 1- The peer delay is symmetric > 2- The peer delay is close to what you expect for the length of the cable you > are using to connect the two peers (short patch cables are not a good idea > for this case, I would use a cable a few meters long) in the i210 <—> FEC setup by only changing compensation values for the FEC side. Regards — Delio _______________________________________________ Linuxptp-users mailing list Linuxptp-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/linuxptp-users
